Loading ...
Loading ...
Loading ...
Operating the Dishwasher (ooo.o.o¢
Canceling or Changing a Cycle
To cancel or change a cycle, open the
dishwasher door far enough to expose the control
buttons then press and hold for three seconds the
two buttons labeled "Cancel Drain" as shown in
Figure 26.
Figu re 26
o _Cance[ Drain_ ®
Wait approximately one minute, then press the
On/Off button
You may now begin a new cycle.
Child Safety Latch
(model SHE660 only)
Your dishwasher is shipped from the factory with
the Child Safety Latch disengaged and in the
normal operating mode. Pull on the door handle to
open the door. The Child Safety latch activation
lever is located in the recess for the door handle.
You must look up into the recess to find the Child
Safety Latch activation lever (see Figure 27).
To activate the Child Safety Latch insert a
matchstick or other non-metal object into the
opening as shown in Figure 27. The activation
lever will release and move toward the left.
You have now activated the Child Safety Latch.
Each time you open the dishwasher door you will
need to shale the activation mever to the right
to release the door locking mechanism, you can
then pull the door open (See Figure 28). After you
open the door you should release the Child Safety
Latch Activation lever and let it slide back toward
the left.
To deactivate the Child Safety Latch insert a
matchstick or other non-metal object into the
opening as shown in Figure 29. Slide the
activation level to the right and hold. Remove the
matchstick and release the lever. The feature has
now been deactivated and you can open the door
by pulling the handle.
Figure 27
\
/
Figure 29
14
Figu re 28
Loading ...
Loading ...
Loading ...