Hunter 55086 Searow 54" Matte Black Outdoor Ceiling Fan

User Manual - Page 5

For 55086.

PDF File Manual, 12 pages, Read Online | Download pdf file

55086 photo
Loading ...
Loading ...
Loading ...
4
1886
Preparing the Ceiling Bracket
Installing the Ceiling Bracket
Use wood screws (included)
when securing to support
structure with approved
electrical outlet box. Drill
9/64” pilot holes in support
structure to aid in securing
ceiling bracket with
hardware found in the
hardware bag.
Use machine screws (pro-
vided with outlet box) when
securing to existing ceiling
fan-rated outlet box. Make
sure it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
Option 2:
Wood Screws
Option 1:
Machine Screws
OFF
T
urn P
ow
er
Do this rst!
The machine screws are the ones
that came with your outlet box.
Hunter Pro Tip:
For angled ceilings,
point opening
toward peak.
A
N
G
L
E
D
M
O
U
N
T
IN
G
T
IP
BAG
Wood Screw
Washer
x2
x2
1
STEP
2
STEP
3
STEP
Remove all four
mounting isolators.
Install the ceiling plate gasket onto
the ceiling plate. The four holes in
the ceiling plate should lineup with
the four posts in the gasket.
Align the tapered mounting holes in the ceiling plate
with the holes in the ceiling bracket. Install the four
ceiling plate screws found in the
hardware bag and
secure with the ange nuts using an 11/32” wrench.
Hold the ceiling bracket assembly up to the outlet box
and mark the screw locations. To mount to support
structure, also mark the ceiling for drilling pilot holes.
x4
x4
BAG
Canopy Plate Screw
Flange Nuts
Use the wood screw to poke holes
through the rubber gasket in
order to install the ceiling bracket
assembly to your support structure
or ceiling fan-rated outlet box.
You have two options for installation. Pick which one works best for your location. Remove any existing
bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box.
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass
WARNING
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Loading ...
Loading ...
Loading ...