Loading ...
Loading ...
Loading ...
7 8AUS 1800 099 385 NZ 0800 112 660 sharkclean.com.au
NOTE: Some charging
options may not be
included with your vacuum.
To purchase additional or
replacement Lithium ION
Power Pack Batteries,
chargers, and charging docks,
visit sharkclean.com.au
DID YOU KNOW?
The DuoClean
™
floor nozzle
has LED headlights that turn
on automatically to illuminate
the floor surface.
RECYCLING YOUR
LITHIUM ION POWER
PACK BATTERY
When your Lithium ION
Power Pack Battery needs
to be replaced, dispose of it
or recycle it in accordance
with local regulations. In some
areas, it is illegal to place
spent lithium-ion batteries in
the bin or in a municipal solid
waste stream. Return spent
power packs to an authorised
recycling center or to retailer
for recycling. Contact your
local recycling center for
information on where to drop
off the spentpower pack.
NOTE: Lithium-ION Power
Pack takes approximately 3.5
hours for full charge.
NOTE: When used in
handvac mode, the Lithium
ION power Pack provides up
to 22 minutes of runtime in
EXTENDED RUNTIME setting
and up to 10 minutes in MAX
POWER setting.
USING YOUR LITHIUM ION POWER PACK BATTERY
INSTALLING YOUR LITHIUM ION Power Pack BATTERY
Slide the Lithium ION Power Pack Battery into the slot on the
back of the handheld vacuum.
To remove, pinch the release tab and slide the Lithium ION
Power Pack Battery out of the handheld vacuum.
CHARGING YOUR LITHIUM ION Power Pack BATTERY
Using the LITHIUM ION Power Pack Battery Charger
Connect the Lithium ION Power Pack Battery Charger to the
port on the side of the Lithium ION Power Pack Battery, then
plug the charger into a wall outlet. The ION Power Pack Battery
can be charged whether it is inside or outside the handheld
vacuum.
Using the Lithium ION
Power Pack Battery
Charging Dock
Connect Lithium ION Power
Pack Battery Charger to the
Charging Dock. Place power
pack onto dock, then connect
charger to wall outlet.
ASSEMBLING YOUR VACUUM
1 Insert the wand into the DuoClean
™
floor
nozzle, pressing it in until it clicks securely
into place.
STEP 2
CLICK
STEP 1
CLICK
2 Insert the handheld vacuum into the top
of the wand, pressing it in until it clicks
securely into place.
LED BATTERY POWER METER
In Use
As the Lithium ION Power Pack discharges, its 3 LED lights
will gradually turn off in sequential order. When less than 5%
of charge remains, the bottom LED light will flash, indicating a
charge is needed.
Full
Charge
Mid
Charge
Low
Charge
No
Charge
Nearly
Empty
Charging
As the Lithium ION Power Pack Battery charges, the lights will
first blink and then illuminate steadily, in sequential order. All 3
lights will glow steadily upon receiving a full charge, and then
turn off after a short period. This preserves long-term battery life
and allows the battery to remain connected to the charger even
after reaching full charge.
Full
Charge
Low
Charge
Mid
Charge
Nearly
Full
ION
PO W ER P AC K
Loading ...
Loading ...
Loading ...