Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TIMER: BELAY STOP/START FEATURE: YOU WILL SEE:
ON
DO THIS: THEN DOTHIS:
PRESS TIMER PRESS UP(_) OR
BUTTON DOWN (v)BUTTON
SLEEP FEATURE:
DO THIS:
PRESS
SLEEP
BUTTON
CHECK FILTER FEATURE:
NOTE: For Delay Stop, the unit must be in the ON position.
NOTE: For Delay Start, the unit must be in the OFF position. To adjust
timer setting, tapor hold theUP arrow(A ) orthe DOWN arrow(_ ) to
change delay timer at .5 hour increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will count down the time
remaining until start (8, 7.5, 7,etc.). The Delay Start mode automatically
selects cooling at High Fan Speed. The temperature maintained will be
the same as previously set. To change the set temperature, press
"COOL " then Up or Down arrows until the desired temperature is
indicated on the display. After 5 seconds, the control will automatically
change the displayback to thehours remaining untilthe unit willstart/stop.
Turning the unit "ON" or "OFF" at any time will cancel the Delay Start/Stop
function.
YOU WILLSEE:
i
Auto s,.,p c.+.
+0,+,+,++,,+, ,+_ , _;:_ \
\
MGHT ON
Mode
NOTE: In this" MODE " the selected temperature will increase by 2°F 30
minutes after the mode is selected. The temperature will then increase by
another 2°F after an additional 30 minutes. This new temperature will be
maintained for 7 hours before it returns to the originally selected
temperature. This ends the " Sleep " MODE and the unit will continue to
operate as originally programmed. The " Sleep" MODE program can be
cancelled at any time during operation by again pressing the " Sleep"
button.
YOU WILLSEE:
MGHT ON
NOTE: This feature is a reminder to clean the Air Filter (See Care and
Cleaning) for moreefficient operation. The LED (light) will illuminateafter
250 hours ofoperation. To reset aftercleaning the filter, press the"Check
Filter" button and the lightwill go off.
8
Loading ...
Loading ...
Loading ...