Loading ...
Loading ...
Loading ...
Youcanaddanitemtothedishwasher
duringthefirst10minutesofthecycle.
1.Unlatchthedoorto stopthecycle.Waita
fewsecondsforthesprayactiontostop
beforeopeningthedoor.
2.Openthedoorandaddthedishes.
3.Closethedoor.
4.Thedishwasherwillstartautomatically
aftera 5-secondpausewhenyouclose
thedoor.
Torunyourdishwasherata latertime,or
duringoff-peakhours,youcandelaythe
startofa cyclefor2,4, or6 hours.
Todelaythestart,followthesesteps:
Example for delayed Normal cycle with
Energy Saver Dry
1. Press a Wash Selection pad for the
desired cycle. See "Cycle selection chart"
earlier in this section for cycle descriptions.
2. Press a pad to select an option. If you
change your mind, press the pad again
to turn the option off. To select a different
option, just press another pad. See
"Option selections" earlier in this section.
3. Press the Delay Hours pad once for a
2-hour delay start, twice for 4 hours,
or three times for 6 hours.
The number above the Delay Hours pad
will glow and the dishwasher will start the
cycle in the amount of hours you have
selected.
4. Press the Start pad to begin the delay cycle.
NOTE: To turn Delay Hours off, press the pad
until no number is lit above the pad.
IMPORTANT:
,, Operate your dishwasher only when you are
at home.
,, If your home is equipped with a water soft-
ener, make sure the dishwasher is not timed
to start during regeneration of the softener.
During drying, vapor escapes through the
vent at the upper left corner of the door.
This is normal. The vapor is the result of
moisture in the dishwasher being removed
during drying.
IMPORTANT: The vapor is hot. Do not touch
the vent during drying.
Loading ...
Loading ...
Loading ...