Please read these instructions carefully and
retain for future reference.
Compact Ceramic
Oscillating Heater
1800W oscillating heater with ceramic element
Instruction Booklet
HE2105
Contents
Sunbeam’s Safety Precautions 1
Sunbeam’s Safety Precautions for your Heater 2
Sunbeam’s Total Safety System 3
Features of your Compact Oscillating
Ceramic Heater 4
Using your Compact Oscillating
Ceramic Heater 6
Using the Oscillation function 7
Resetting the Total Safety System 7
Troubleshooting Guide 8
Care and Cleaning 8
1
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam’s Safety Precautions
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
provided with an appliance.
by grasping the plug - do not pull on the cord.
when the appliance is not in use and
before cleaning.
cord unless this cord has been checked
and tested by a qualified technician or
service person.
on the appliance.
physical, sensory or mental capabilities, or
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
they do not play with the appliance.
high when the appliance is operating.
in use.
other than its intended use.
flame, electric element or on a heated oven.
over the edge of a table or bench top or touch
any hot surface.
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
recommend the use of a residual current
supplying power to your appliances.
or any other liquid unless recommended.
remote control system.
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
2
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam’s Safety Precautions
burns, do not let bare skin touch hot surfaces.
If provided, use handles when moving this
heater. Keep combustible materials such as
furniture, pillows, bedding, papers, clothes and
front of the heater and keep them away from
the sides and rear.
is used by or near children or invalids and
whenever the heater is left unattended.
the cord away from traffic areas where it will
not be tripped over.
socket outlet.
surrounds of a bath, shower, laundry area or
swimming pool.
cause electric shock or fire, or damage to the
heater.
on soft surfaces, such as beds, where opening
may become blocked.
paint or flammable liquids are used or stored.
heater.
Important instructions – retain for
future use.
3
Safety auto shut off
Your Sunbeam Compact Oscillating Ceramic
heater is equipped with a safety system that
detects any abnormally high temperatures
within the heater and automatically shuts it
off to prevent overheating. If the heater is
sounding. Immediately turn the heater off at
the power outlet and check that there aren't
the user to manually reset the heater for it to
resume operation.
see page 7.
Thermal back-up device
In addition to this automatic shut-off, your
heater contains an over temperature thermal
back-up device to provide additional back-
up protection. If the heater is in an overheat
situation, the back-up device will operate,
stopping the power flow to the element and
fan.
In the event that the back-up device is
activated, the heater will need to be reset.
see page 7.
Instant tip over cut out
power to the heating element and fan if the
will not resume operation until it is replaced
in the upright position.
Sunbeam’s Total Safety System
Mode button
Press the mode button to select the desired
operating mode:
or
Fan setting
Ideal for circulating cool air in summer, the fan
setting operates the fan without heat.
Power ON light
Illuminates to indicate that the heater is
connected to the power outlet.
LCD screen
including the ambient room temperature, the
selected mode, or heat setting.
Safety auto shut-off
abnormally high temperature variations within
the heater and automatically switches it off to
prevent overheating.
4
Features of your Compact
Oscillating Ceramic Heater
AUTO
TEMP
SET
TEMP
5
Oscillation function
greater heat distribution. Simply press the
function.
Electronic thermostat
temperature control. Select the auto mode
to set the electronic thermostat and turn
the thermostat dial to the desired heat
setting. Once your desired temperature is
reached, the heater will cycle on and off
to maintain it.
Thermostat dial
When in auto mode, turn the thermostat dial
to select your desired temperature.
Ceramic element
efficient than other element types as it
converts more electricity into heat.
Ceramic elements are also safer than other
at such low temperatures that they will not
ignite even highly flammable materials such
as tissue paper.
AUTO
TEMP
SET
TEMP
6
ensure that the air intake and outlet are
clear of obstructions.
outlet and turn the power on.
illuminate.
NOTE: When the heater is switched on it
will be automatically set to the Standby
mode.
desired setting, as follows. Each time you
press the mode button it will scroll through
the various settings.
LOW – low heat setting
– high heat setting
– for operating the electronic
thermostat
– for fan only operation
without heat
– the heater remains inactive
when in this mode
NOTE:
the mode is changed from low to high.
button until the standby mode is set and
switch the power off at the power outlet.
Setting the electronic thermostat
the precise temperature. Once the desired
temperature level is reached the heater will
cycle on and off to maintain it.
display the ambient room temperature.
2. Set the desired temperature by turning the
NOTE:
the set temperature the heater will
the room temperature falls below the
preset temperature.
NOTE: It is normal for the heater to cycle
on and off as it maintains the preset
cycling, raise the thermostat setting.
Using your Compact Oscillating
Ceramic Heater
7
Using the Oscillation Function
heater will then begin to oscillate from side
to side.
again.
Resetting the Total Safety System
Resetting the safety auto shut-off
abnormally high temperatures within the heater
and shuts it off to prevent overheating. Should
the safety auto shut-off activate and switch off
the heater, it will need to be reset.
until the standby mode is selected.
the unit to cool down.
and operate as usual.
Resetting the thermal backup device
In addition to the safety auto shut-off, your
heater also contains a thermal back-up
device for additional protection. Should the
thermal back-up device activate and switch
off the heater it will need to be reset.
this page.
8
If your heater fails to operate check the
following:
breaker is working.
obstruction, turn the heater off and follow
the reset instructions on page 7.
heater restarts.
activated, so follow the instructions for
resetting on page 7.
Troubleshooting Guide
Ensure that the heater is switched off and
disconnected from the power outlet before
cleaning.
a soft damp cloth and dry thoroughly with a
dry cloth.
Over time, dust may accumulate on the front
damp cloth.
Store the heater in a cool dry place when
not in use. Store the heater in its carton if
possible.
Care and Cleaning
your appliance, please phone our customer
to Sunbeam at the address listed below.
On receipt of your claim, Sunbeam will
seek to resolve your difficulties or, if the
appliance is defective, advise you on how
to obtain a replacement or refund.
or negligent handling and normal wear and
tear.
does not cover freight or any other costs
incurred in making a claim. Please retain
your receipt as proof of purchase.
are in addition to your other rights and
remedies under any laws which relate to the
appliance.
Our goods come with guarantees that cannot
for compensation for any other reasonably
foreseeable loss or damage. You are also
entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to
Should your appliance require repair or
service after the guarantee period, contact
your nearest Sunbeam service centre.
service centres visit our website or call:
Australia
www.sunbeam.com.au
New Zealand
www.sunbeam.co.nz
In the unlikely event that this appliance develops any malfunction
within 2 years of purchase (3 months commercial use) due to
faulty materials or manufacture, we will replace it for you
free of charge.
2 Year Replacement Guarantee
is a registered trademark.
Need help with your appliance?
Contact our customer service team or visit
our website for information and tips on
getting the most from your appliance.
In Australia
Visit www.sunbeam.com.au
Or call 1300 881 861
In New Zealand
Visit www.sunbeam.co.nz
Or call 0800 786 232
Made in China.
Due to minor changes in design or otherwise,
the product may differ from the one shown in this leaflet.
© Copyright.
Sunbeam Corporation Limited 2006.
ABN 45 000 006 771
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Unit 3, Building D
26 Vestey Drive
Mt Wellington Auckland
New Zealand
Sunbeam Corporation is a division of GUD Holdings Ltd.
