Loading ...
Loading ...
Loading ...
F,,L,NOATES
REGULAR SERVICE
Check Tire Pressure
Check Operator Presence and
T Interlock Systems If
R Check for Loose Fasteners if 1##7
Sha pen Rep,oceMowerBlades
T Lubrication Chart
0 Check Battery Level _s
R Clean Battery and Terminals _
v'Check Transaxle Cooling
Adjust Blade Be_t(s) Tension _s
Adjust Motion Drive Belt(s) Tension V'_
Check Engine Oii Level V P I1_
Change Engine Oil II1_1 213 V w
E CleanAirFi'ter _Vf_
N Clean Air Screen
Inspect Muffler/Spark Arrester V p
Replace Oil Filter (If equipped) ._z
N Clean Engine Cooling Fins
V'2
Replace Spark Plug if
Replace Air Filter Paper Cartridge V'2
Replace Fuel Filter V p
1 - Change more ofte_ when operating under a heavy load or irl high ambient temperatures. S - If equipped with adjustable system.
2 - Sewice more oft ei'_ when operating in dirty or dusty conditions, 6 - Not required if 0quipped with maintenance free batter
3 - If equipped wi_ oil filter, change off every 50 hours. 7 o Tighten front axle pivot bog to 35 ft.-Ibs, maximum,
4 - Replace blades more oftetl when mowing in sandy _oil Do r_ot overtighte_,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
LUBRICATION CHART
Spindle-
Zerk Zerk
_Front Wheel
Bearing
Zerk
_Er
1eel
Zerk
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
i
i
(_General Purpose Grease
_Refer to Maintenance "Engine" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
18
Loading ...
Loading ...
Loading ...