Loading ...
Instruction Manual for “XFS” Light
Commercial Wall Exhaust Fans
Read Instructions Completely Before Installation & Save For Reference
Congratulations on the purchase of your quality built direct drive, wall exhaust ventilation fan. Used for general exhaust ventilation, these
fans come fully assembled and 100% of fans are tested for proper operation before shipping.
“XFS” Exhaust Fans:
These models have a rugged, welded steel box housing with a powder coated finish and aluminum exhaust louvers. The louvers open
automatically when the fan starts up and close when the fan stops.
XFS-M 03/03/21 Page 2 of 2
WARNING: FAN IS GUARDED ON INTERIOR. EXTERIOR SHOULD BE MOUNTED AT LEAST
2.5 METERS ABOVE GRADE LEVEL OR PROPERLY GUARDED FROM ACCIDENTAL
CONTACT OF THE BLADE THROUGH THE LOUVERS.
MAINTENANCE
Motor, blade and louvers should be kept clean of any buildup to prevent premature motor failure and to achieve proper performance.
Automatic louvers should be kept operating freely. As with all mechanical equipment scheduled inspections should include checking that
all hardware is secure and blade set screws are tight.
DO NOT PRESSURE WASH THE FAN.
CANARM LTD. CANARM LTEE. ARTHUR MANUFACTURING FACILITY
2157 PARKEDALE AVE. PO BOX 367 2555 RUE BERNARD LEFEBVRE #7686 CONCESSION 16, RR4
BROCKVILLE, ONTARIO K6V 5V6 LAVAL, QUEBEC H7C 0A5 ARTHUR, ONTARIO N0G 1A0
TELEPHONE: (613) 342-5424 TELEPHONE: (450) 665-2535 TELEPHONE: (519) 848-3910
FAX: 1-800-263-4598 FAX: (450) 665-0910 FAX: (519) 848-3948
WARNING
Moving parts,
disconnect
power before
servicing.
!
INSTALLATION
Installation is fast and simple. A sturdy framed wall opening should be prepared in advance to the size indicated for your fan in the charts
above. With lag bolts for wooden frames or nut, bolt and lock washers for steel frames, secure the fan using the four mounting holes
provided, one in each corner of the fan.
OPERATION
The fan has a cord and grounded plug. Plug the fan into a 115 Volt socket. Use the pull chain to turn fan off and adjust speed.
WARNING: MOTORS ARE EQUIPPED WITH AUTOMATIC OVERLOAD PROTECTION AND MAY RESTART
WITHOUT WARNING. ALWAYS DISCONNECT FROM POWER BEFORE ATTEMPTING SERVICE.
Loading ...
Loading ...