Loading ...
Loading ...
Loading ...
15
TION INSTRUCTIONS
!1
Attach adhesive foam pad to the back
of the water filter head as shown in
Diagram5. Write the date to be replaced
on the filter (date installed +6months).
Remove the double sided foam backing
and attach the filter to the desired
position, reinforcing the filter with the
screws provided as located in step10
(refer to the previous page).
!2
Run the 1/4” (6mm) tubing to the back of
the refrigerator ensuring there is enough
tubing to pull the refrigerator out for
service.
!3
Using the measurement guide shown in
Diagram6, mark out 5/8” (16mm), on the
end of the tubing as shown in Diagram7.
!4
Insert the tubing marked 5/8” (16mm)
into the water (solenoid) valve up to the
marked line as shown in Diagram8.
!5
Pull gently on tubing to ensure it is locked
in as shown in Diagram9.
!6
The completed installation should look like
Diagram11 on page 16.
!7
Turn the isolating faucet on and check that
all connections are dry and free of drips.
!8
Coil water line tubing behind the
refrigerator. Push your refrigerator into
place being careful not to kink or squash
the water line tube running into the water
(solenoid) valve.
!9
Read pages 16–17 carefully and then turn
refrigerator on.
Diagram 5
Double sided foam
attachment
Waterline connection to refrigerator
Diagram 9
Diagram 6
Diagram 7
Diagram 8
Loading ...
Loading ...
Loading ...