Loading ...
Loading ...
Place a mug on the drip tray. If
using a travel mug, remove the
drip tray and place the mug on the
drip tray base. Lift the handle and
place a K-Cup
®
pod in the K-Cup
®
pod holder. Lower the handle
completely to close the lid.
High Altitude Brewing: While
holding the brewer handle up, push
down slowly on the K-Cup
®
pod in
the pod holder until the bottom of
the K-Cup
®
pod is punctured by the
exit needle.
Press the POWER button.
The POD and CARAFE
buttons will blink. Select
POD, then select your
brew size. Press the
BREW button to initiate
brewing. For a bolder
coffee, press the STRONG
button before pressing
the BREW button.
Brewing is complete when
the brew indicator light is no longer illuminated.
We recommend using a Keurig
®
Rinse Pod or running a
cleansing brew immediately after brewing hot cocoa or other
sweetened pods to keep the needles clean.
NOTE:
After 5 minutes, the brewer will go into Auto Off mode.
To reactivate, press the POWER button.
1
1
2
2
Brew Your First Single Cup
Brew Your First Carafe
Press the POWER button.
The POD and CARAFE
buttons will blink. Select
CARAFE, then select
your brew size. Press the
BREW button to initiate
brewing.
Once the brew is complete,
the heating plate will
automatically turn on and
remain on for 2 hours -
the CARAFE button will
illuminate red. To turn off the heating plate, press and hold the
CARAFE button until the light is no longer illuminated.
If you accidentally shut the heating plate off, press and hold
the CARAFE button until the red light illuminates to turn it
back on.
Fill the water reservoir
to the MAX fill line.
Lift the filter basket
cover up and insert a
12 cup paper filter into
the filter basket.
Add the desired
amount of ground
coffee (1 tablespoon
of ground coffee per
cup is recommended).
Close the filter basket
cover completely and
make sure the carafe
is on the heating plate.
NOTE: The maximum capacity for regular ground coffee is 15 tablespoons and 12
tablespoons for decaf. Exceeding this amount may cause overflow.
Place Mug & Pod Brew & Enjoy!
Place Carafe & Fill Basket
Brew & Enjoy!
Smart Start heats then brews in one simple process. No need
to wait for the brewer to heat before selecting brew size.
Power on your brewer, add coffee, select your brew type, then
select your brew size. Press the BREW button. The brewer will
heat, then automatically begin brewing.
Single Cup Auto Off automatically turns your brewer off 5
minutes after the last brew for energy savings.
Carafe Auto Off automatically turns your heating plate off 2
hours after the last brew for energy savings.
Auto Brew programs the carafe to brew at a specific time up
to 24 hours in advance.
Strong Brew increases your coffee strength and intensity for a
single cup. For bolder coffee, press the STRONG button.
High Altitude To ensure your brewer works properly at higher
altitudes (5,000 feet), enable the High Altitude setting by
pressing and holding the POD and CARAFE button for 3
seconds. When enabled, a mountain icon
will appear on
the display screen.
Brewer Features
12
108
6
AUTO
10:30
STRONG
H
M
3
BREW
BUTTON
5
2
(OPTIONAL)
4
1
12
108
6
AUTO
10:30
STRONG
H
M
3
BREW
BUTTON
4
2
1
Pause & Pour a cup mid-brew while brewing a carafe using
the 20 second automatic pause feature.
NOTE: Removing the carafe for more than 20 seconds may cause the filter basket to
overflow.
Auto Brew Instructions
Fill the water reservoir to MAX fill line and load the paper
filter and coffee grounds.
1. Press the AUTO button. Use the H/M buttons to set the
time for auto brew to begin, press the blinking BREW
button to confirm the time.
2. Choose your brew size, then press the blinking BREW
button to confirm the size.
The AUTO brew setup is now complete.
A clock icon will appear on the screen and the AUTO button will
be illuminated to signal AUTO is on.
Note: Once AUTO brew is enabled, you will only be able to brew a single cup. To disable
AUTO brew, press the AUTO button once. The clock icon will disappear from the screen.
12
10
8
6
AUTO
STRONG
H
M
OZ
10:30
ADD WATER
DESCALE
CUPS
PM
Loading ...
Loading ...
Loading ...