Loading ...
Loading ...
Loading ...
ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connecting 3-Wire Connection: Optional
Use for direct wire or power supply cord where local codes
do not permit connecting cabinet-ground conductor to
neutral were.
Connecting Neutral Wire
1. Remove center terminal block screw. Also remove neutral
ground wire by removing external ground conductor screw.
3. Connect remaining wires to outer terminal block.
2. Connect neutral wire and neutral wire of power supply cord/
cable to center terminal block.
4. Connect a separate copper ground wire from the external
ground conductor to an adequate ground.
LEVELING
Leveling your dryer properly reduces excess noise and vibration.
Excessive Weight Hazard
Use two or more people to move and install dryer.
Failure to do so can result in back or other injury,
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level, tip
dryer and adjust feet up or clown as shown in Steps 3 and 4,
repeating as necessary.
nt Jn
Not Level LEVEL Not Level
22
Loading ...
Loading ...
Loading ...