Loading ...
2
• Read all of the Installation Manual that is included with the
DrawerMicro™ Oven before installing in the ush mount
con guration.
• Observe all governing codes, ordinances, and safety instructions.
• Be sure to leave these instructions with the consumer.
1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.
A. 6" (152.40 mm)
B. Suggested electrical outlet location
C. Anti-Tip block
D. 5" (127 mm)
E. 3-1/2" (88.90 mm)
F. 4" (101.60 mm)
G. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
H. 14-13/16" (376.24 mm) to bottom of Anti-Tip block
I. 1-1/16" (26.97 mm)
J. 23-1/2" (596.90 mm) minimum depth
K. 22-1/8" (561.97 mm)
L. 1-3/4" (44.45 mm)
M. 16-7/8" (428.62 mm) opening
N. Floor must support 100 lb (45.4 kg)
O. 1-3/4" (44.45 mm)
A. 22" (558.8 mm) mounting cleat opening width
B. 1/4" (6.35 mm)
C. 1-1/16" (26.97 mm)
A. 22-1/8" (561.97 mm) mounting cleat opening width
B. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum ush opening width
C. 3/4" (19.05 mm) shelf
Parts Included
Qty.
1
PREF-B019MRP0
Flush Mount
2
LX-CZB055MRE0
Mounting screws
C
N
H
E
F
D
A
B
J
L
I
M
K
G
Note: the face of the shelf must
sit 1
3
/4" (44.45 mm) back from
the face of the cabinet.
cabinet face
shelf face
O
Figure 1
C
L
Top view
A
Anti-Tip block
Mounting cleat
B
C
Drawer face
Cabinet
face
Figure 2A
C
Front view
No oven
B
A
Suggested electrical
outlet location
Anti-Tip block
Figure 2B
Loading ...
Loading ...
Loading ...