Loading ...
Loading ...
Loading ...
Operating User Interface Features
Setting Preferences, con't
INSTALL CYCLE
Run the INSTALL CYCLE before operating the
washer the first time. Remove all items from the
washer drum and press start. For more informa-
tion on performing the washer INSTALL CYCLE,
refer to the Installation Instructions accompanying
this washer.
If the washer has been installed according to
Installation Instructions, IFISTRLL PRSSED -
DOOR CRFI BE OPENED will be displayed and
the washer is ready to use.
If the washer was not installed properly, 170 LURTER -
OPEFI LURTER URLUE5, LURTER HOSES - EHECH
LURTERHOSES or CRLL SERUICE 8TT H3S
3E_8"?will be displayed to indicate the installation
error.
The errors may result from the following condi-
tions:
. nO UJRTER --Water inlet hoses have not been
attached to water supply or water supply valves
have not been turned on. Install hoses correctly
and turn on water supply valves.
. CHECH HOSES --The hot inlet hose may have
been connected to the cold water supply and
the cold inlet hose may have been connected
to the hot water supply. Check hoses for cor-
rect supply connection. If incorrect, disconnect
hoses and connect to correct inlets according to
Installation Instructions.
. CRLL SERtJICE 877 H3S 3287--Error can
only be corrected by calling a qualified techni-
cian (1-877-435-3287).
Repeat the INSTALL CYCLE when corrections are
completed.
i
select
Loading ...
Loading ...
Loading ...