Loading ...
Loading ...
Loading ...
Building in the appliance
108
Remove the cover.
Screw the fixing place loosely into
the top left of the appliance using the
screws. So that you can adjust the
position of this part, do not tighten
the screws yet.
Push the contact component onto
the fixing bracket.
Screw the fixing bracket loosely
into the bottom of the appliance with
the screws. So that you can adjust
the position of this part, do not
tighten the screws yet.
Carefully remove the protective foil
from the profile strip.
Stick the profile strip onto the side
of the appliance on which the door
will open, flush with the front.
1. Align the profile strip with the bottom
edge of the top fixing bracket.
2. Stick it down along its entire length.
Loading ...
Loading ...
Loading ...