Loading ...
Loading ...
Loading ...
Drying Clothes
If These Controls
are Different from
_ Yours
These controls are intended to show the
variety of features that are available in
the product line. If your dryer does not
have all the options that are shown, it is
not a mistake. The int\)rmation
provided applies to several of the
models in the product line.
Lint
Filter
IMPORTANT: Lint filter must be in
place in door opening when using dryer
or loading and unloading dryer• If tilter
is not in place, clothing could flailinto
front air duct.
1. Sort clothes for drying
Properly dried clothes will need a minimum of care when removed from
the dryer. Clothes properly sorted for washing should be properly sorted
for drying also. Follow the examples below.
SORT EXAM PLES
Dark and Light Separate light clothes from dark clothes.
Colors
Lint Shedding Towels, flannels, chenille, cottons, rugs
Fabrics
Lint Receiving Corduroys, knits (including socks),
Fabrics permanent press, and synthetics
Heavy and Light Lightweight fabrics dry faster than heavyweight
weight Fabrics fabrics. If mixed loads are dried together (such
as sheets and towels), remove the lighter
weight fabrics when they are dry to prevent
over drying and wrinkling.
2. Clean the lint filter before each use
A clean lint filter ensures efficient drying and clothes will remain lint-
free when unloading dryer. A layer of lint on the screen will reduce air
flow through the dryer and lengthen drying time. Lint screen may be
washed if needed.
• Lint filter is located at front of the dryer in the lower part of door opening.
• Replace lint filter in door recess and push in firmly. Words on filter
should face front of dryer.
Add clothes loosely into dryer drum. Add fabric softener sheet, if
desired. Close loading door. Dryer will not operate with the door open.
FABRIC SELECTOR
DENCATE PERM,PRESS
LOW MEDIUM
N_-KY _ggg
3. Select FABRIC SELECTOR setting
Set FABRIC SELECTOR knob to most appropriate temperature for type
of fabric in load. Follow garment manufacturer's care label for
recommended temperature settings. See chart below.
FABRIC SELECTOR CYCLE
Regular/High Automatic Regular
Approximatd_ 160"F Use for sturdy items like play or work clothes.
Perm. Press Regular/ Automatic Regular/Perm
Med. High Use for sturdy items like play or work clothes,
(some models) permanent press items, and synthetics.
Approximatd 3 155"F
Perm. Press/Medium Automatic Permanent Press/Knits
Approximawl_ 150"F Use for permanent press and synthetic items.
DelicatelLow Automatic Delicate
Approximatel 3 129"F Use for delicate items.
Fluff/No Heat Any Cycle
No heat
Time Dry cycle can be used with all Fabric Selector settings.
4
Loading ...
Loading ...
Loading ...