Loading ...
Loading ...
Loading ...
CARTONCONTENTS
Checkcartoncontentsagainstthefol-
lowinglist.
Model 358,799201
• Trimmer
• Shield
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance or find
parts missing or damaged, call
1-800-235-5878.
ASSEMBLY
,_/LWARNING: If received as-
sembled, review all assembly steps to
ensure your unit is properly assembled
and all fasteners are secure.
• Extend the tube until it snaps into
place.
ADJUSTING THE HANDLE
1. Loosen wing nut or knob on han-
dle.
2. Rotate the handle on the tube to an
upright position; place in a comfort-
able position and retighten wing
nut.
ATTACHING THE SHIELD
,_WARNING: The shield must be
properly installed. The shield provides
partial protection from the risk of
thrown objects to the operator and oth-
ers. Your unit is equipped with a line
limiter blade, which cuts excess line to
the proper length while running. The
line limiter blade (on underside of
shield) is sharp and can cut you.
NOTE: If shield is not properly
installed, damage to unit (including
motor failure) will result.
1. Align the installation arrow on the
shield with the installation arrow on
the motor housing (see illustration
below).
2. Insert the shield onto the motor
housing. Ensure cutting line re-
mains free to rotate and is not
caught between the shield and the
motor housing.
3. Twist the shield as illustrated until it
snaps securely into place. Make
sure the shield is facing the back of
the unit as shown on the front cov-
er of this manual.
ALIGN INSTALLATION ARROWS
Twist shield in
direction of
arrow to assemble
CAUTION: Sharp line limiter blade
Loading ...
Loading ...
Loading ...