580752271 User Manual

Loading ...

SelectblackfansoapPrecisionSprayTM nozzlefor

general cleaning. Greatfor applying soap to

vehicles, boats, driveways, decks, and patios.

FAN SOAP

3. Pull back on collar,insert new PrecisionSprayTM nozzle

and releasecollar. Tug on nozzleto makesure it is securely

in place.

UsageTips

• For most effective cleaning, keep PrecisionSprayTM nozzle

from 8 to 24 inches (20 to 61 cm) awayfrom cleaning

surface.

• If you get PrecisionSprayTM nozzletoo close, especially

using a high pressure nozzle,you may damage surface

being cleaned.

• DONOT get closer than 6 inches (15 cm) when cleaning

tires.

2-1N-1 Soap System

_i, CAUTION Chemicalscan cause bodily injury, and/or

property damage.

• NEVERusecausticliquid with pressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followall

manufacturersinstructions.

CleaningandApplyingDetergent with the

Project Pro® PerfectMixTM Siphon

To apply undiluted detergent using the blue

PerfectMixTM siphon, follow these steps:

1. Review use of PrecisionSprayTM

nozzles.

2. Attach PerfectMixTM siphon hose to

pump and PerfectMixTM concentrate

bottle.

NOTICE Contactwith the hot muffler can damage detergent

siphoning tube.

• When inserting the siphon intoa detergent solution bottle, route

thetubeso asto keepit from inadvertently contacting the hot

muffler.

3. Make sure fan soap (black) or jet soap nozzle (magenta)

is installed.

NOTE:Detergent cannot be applied with the high pressure

nozzles (Cyan, Orange or Red).

4. Make sure garden hose is connected to water inlet.

Checkthat high pressure hose is connected to spray gun

and pump. Turn on water.

NOTICE You must attach all hoses before you start the

engine.

• Startingtheenginewithoutall the hosesconnectedandwithout

the waterturnedONwill damagethe pump.

• Damageto equipmentresultingfrom failureto follow this

instructionwill void warranty.

5. Start engine following instructions How to Start Your

Pressure Washer.

6. Apply detergentto a dry surface, starting at lower

portion of areato be washed and work upward, using

long, even, overlapping strokes.

7. Allow detergent to "soakin" for 3-5 minutes before

washing and rinsing. Reapply as neededto prevent

surface from drying. DO NOTallow detergent to dry on

(prevents streaking).

Cleaningand ApplyingDetergent with the Standard Clear

Siphon

To apply diluted detergent using the

standard clear siphon tube, follow these

steps:

1. Review use of PrecisionSprayTM

nozzles.

2. Attach clear siphon hose to barbedfitting on pump.

3. Mix detergent solution as required by job.

4. Placesmall filter end of clear siphoning tube into

container with diluted solution as described above.

NOTE:DONOT insert standard siphon hose in Extreme

Concentrate.Failure to dilute concentrate will causeexcessive

application and consumption of solution.

NOTE:Make sure the filter is fully submerged in fluid while

applying solution.

NOTICE Contactwith the hot muffler can damage detergent

siphoning tube.

• Wheninsertingthe siphoninto adetergentsolutionbottle,route

the tubeso asto keepit from inadvertentlycontactingthe hot

muffler.

5. Makesure fan soap (black) or jet soap nozzle(magenta)