Ikea IUD9500WX2 undercounter dishwasher

USER INSTRUCTIONS - Page 7

For IUD9500WX2.

PDF File Manual, 24 pages, Read Online | Download pdf file

IUD9500WX2 photo
Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Control Lock To avoid unintended use of To turn on Lock, press and hold Heat Dry for at least
Heated your dishwasher, or cycle 4 seconds.
and option changes during To turn off Lock, press and hold Heat Dry for at least
Dry a cycle. 4 seconds.
Anytime
or When Control Lock is lit all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
Heated controls are locked.
Dry
Control Lock
IM PORTANT:
The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the
best wash performance. Ifthe incoming water is less than the recommended temperature or food soils are heavy, the cycle will
automatically compensate by adding time, heat and water as needed.
The very first wash cycle after installation in your home will be adjusted to include an additional 2 rinses. This cycle must not be
interrupted for proper sensor adjustment. Ifthis adjustment cycle is canceled or stopped before the Clean light comes on at the end of
the cycle, the next wash cycle will repeat this sensor adjustment.
CONTROL PURPOSE COMMENTS
START To start or resume a If the door is opened during a cYcle orthe power is interrUpted, the Start/Resume indicator
- O wash cYCle f!ashes. The CYC!e will not resume unti ! the door is closed and Start/Resume is pressed,
RESUME
To cancel wash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
@sanitized TOfollow the The Clean indicator glows when a cycle is finished.
@Clean progress of your .. . . : . i . . : : :
..... if you select the San]tEe option, when the SanltEe cycle is finished, the SamtEed indicator glows.
or Cllsnwasner cycle
Ifyour dishWasher did not pr0perly sanitize your dishes, the light f!ashes at the end 0f the cycle:
Washing This can happen if the cyc!e is interrupted, or the wate_ C0U!d not be heated to the required
@ Drying temperature: The !ight g0es off when Y°U 0Pen and c!0se the door or press CANCELi
Drying System. :;-,
t, t I i-_'"
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat ,_ ....
dries your dishes. ".'. " ;
y,, ;
IMPORTANT: The vapor is hot. Do not touch the vent during the drying cycle, f
/
Loading ...
Loading ...
Loading ...