Loading ...
Loading ...
Loading ...
MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control, An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERRORtone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature,
ii{ EATURE..............................................................................................................................................................................................................................INIMuMTEMP.ITI. MAXIMUMTEMP.ITIM I
PREHEAT 170°F/77oC 550OF/288°C
BAKE 170°F/77°C 550°F/288°C
BROIL ..........................................................................................................................................................................................................................................................................................................................................................................
CONVECTION BAKE 170°F/77°C 550°F/288°C
CONVECTION ROAST 170°F/77aC 550OF/288°C
CONVECTION BROIL 400°F/205°C 550°F/288°C
SLOW COOK Lo (225OF/1080C)Hi (275OF/135QC)
PROBE 140°F/60°C 210°F/99°C
TIMER 12 HF. Mode 0:01 Min, 11:59 Hr./Min:
2,t-Hr. Mode 0:01 Min. 11:59 Hr./Min.
CLOCK 12 Hr, Mode 1:00 Hr,iMinl 12:59 Hr,IMin,
24 Hr. Mode 0:00 Hr,/Min. 23:59 Hr,/Min. ::
DELAY START Hr, Mode !:00 Hr,/Min: 12:59 Hr,iMin:
24Hr.Mode 0:00Hr,/Min. 23:59Hr,JMin.
BAKE TIME 12 Hr. Mode ....................0:01 Min. ........................ 6:00 Hr./Min. ........... :
24 Hr. Mode 0:01 Min. 6:00 Hr./Min.
SELF CLEAN TIME hours 4 hours
SETTING THE CLOCK
The SET CLOCK pad isused tosettheclock.The clockmay
be setfor12 or 24 hour time of day operation.The clock
has been presetat the factoryforthe 12 hour operation.
When the range is first plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will flash.
To set the clock (example below for 1:30)
1. Press SET CLOCK. "CLO" will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30. "CLO"
will stay in the display.
3. Press START. "CLO" will disappear and the clock will
start.
CHANGING BETWEEN 1:2 OR 24 HOURTIME
OF DAY DISPLAY
1. Press and hold SET CLOCK for 6 seconds. "CLO" will
appear in the display.
2. CONTINUE holding the pad until "12NrdAY" or"24Nr
dAY" appears in the display and the control beeps
once.
3. Press SELl= CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"::l.2Nr dAY" or "24Nr dAY",
4. PressSTART toacceptthechangeor pressOFF to reject
the change.
5. Reset the correct time as described in To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.
Loading ...
Loading ...
Loading ...