Loading ...
Loading ...
are of
domestic and industrial facilities (warehouses, garages, parking
lots, agricultural buildings, etc.)
1. an - 1 pc;
uter support bracket (2 pieces);
3. anual;
4.
3 15/16 inches (100mm), 4 15/16
inches (125mm), 5 7/8 inches (150 mm), 7 7/8 inches (200mm),
9 13/16 inches (250mm), 12 inches (305mm) .
Fan type VKM is supplied with polymer-coated steel case.
Fan type VKMz is supplied with zinc-coated steel case.
Fans can be mounted horizontally or vertically. ( ig.1).
.A
canopy should be installed on the inlet side in case of vertical
mounting. An air duct at least 40 inches (1 meter) long should be
connected to an inlet pipe in case of horizontal fan mounting in
conditions of maximum permissible humidity level. The fans may
be supplied with an inlet protective screen and a remote-mount
terminal box.
The mounting process of fans supplied with integral terminal box
using two brackets and four screws is shown on ig. 2-7; the
mounting process of fans supplied with remote-mount terminal
box is shown on ig. 8-12.
Scheme of fan connection to the
power network is shown on fig.13. Fan connection to the power
network should be done with the use of automatic switch QF
(fig. 14, 19). Fan connection should be done with disconnected
power network only. Fan connection to integral terminal box is
shown on fig. 14-18; fan connection to remote-mount terminal
box is shown on fig. 19-23.
IPX4.
t -13 ° F +95 ... +140 ° F (for
the details, please, see the manufacturer's catalog).
Fans centrifugal fans for intake or exhaust ventilation
that are heated in winter time.
Each set contains:
F
2. O
M
Packing box
F
F
F
Input: 120V AC 60Hz.
Protection rating from access to dangerous parts and
water penetration for fans Fans can be operated at
ambien temperatures between and
Fans are compatible with
diameter ducts
Air
motion must match direction of indicator on the fan case
Fans are designed for long-term operation without
disconnection from network.
Fan construction is constantly being improved, that is why some models
can differ slightly from described in this manual models.those
Recylcle at the end of unit's service l
Do not dispose of with other trash.
ife.
WARRANTY
Production meets standard
the territory of the USA and Canada.
Manufacturer guarantees normal operation of the unit
60 months from the da of subject to the
transport, storage, mounting and
operation rules.
If of sales date is absent, warranty period is
calculated from the .
In case of warranty
period consumer has the right to it.
the following address:
Bodor Vents, LLC
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail: [email protected].com
Manufacturer is not responsible for damages
misuse of the unit or gross mechanical .
Owner of the unit must follow the
manual.
operating requirements in
for te resale,
compliance with
proof
production date
failure due to faulty equipment
, the exchange
The unit can be exchanged at
resulting
from alteration
guidelines set forth
in the
of dirt and dust regularly
by using a soft, wet cloth and mild detergent 24-28
Do not allow liquids to come in contact with the electric
motor 29 . Wipe surfaces dry after cleaning.
Fan surfaces need to be cleaned
(Fig. ).
(Fig. )
Loading ...
Loading ...
Loading ...