Loading ...
Loading ...
Loading ...
Water from the dispenser is Water from the dispenser is chilled This is normal.
warm to 50°F (10°C).
The refrigerator has just been Allow 24 hours after installation for the water supply to cool
installed, completely.
A large amount of water was Allow 3 hours for the water supply to cool completely.
recently dispensed.
Water has not been recently The first glass of water may not be cool. Discard the first
dispensed, glass of water dispensed.
The refrigerator is not connected Make sure the refrigerator is connected to a cold water pipe.
to a cold water pipe. See "Water Supply Requirements."
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
To view an animation showing how to adjust and align the doors, refer to the Product Help/FAQ section of the brand website and search
for "door closing and door alignment."
The doors will not close The door is blocked open. Move food packages away from door.
completely
A bin or shelf is in the way. Push bin or shelf back into the correct position.
Recently installed Remove all packaging materials.
The doors are difficult to The door gaskets are dirty or sticky. Clean gaskets and contact surfaces with mild soap and
open warm water. Rinse and dry with soft cloth.
The doors appear to be The doors need to be aligned, or the See "Refrigerator Leveling, Door Closing and Alignment."
uneven refrigerator needs to be leveled.
The refrigerator is unsteady The refrigerator brake feet are not Remove the base grille. Turn both brake feet (one on each
or it rolls forward when snug against the floor side) clockwise, the same amount, until they are snug against
opening and closing doors the floor. See "Refrigerator Leveling, Door Closing and
Alignment."
37
Loading ...
Loading ...
Loading ...