Loading ...
Loading ...
Loading ...
22
Program
Running
Time(min)
Energy
(Kwh)
Water
(L)
Description
Of Cycle
Detergent
Pre/Main
Rapid
Pre-wash(55℃)
Main wash(60℃)
Rinse(55℃)
Rinse(58℃)
Drying
60 0.56 13
0/17.8g
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page Product fiche.
Make sure that the water supply is turned on to full pressure.
4. Open the door, press the power button to switch on the machine.
5. Choose a program, the response light will turn on.
6. Press the Start/Cancel button, then close the door within four seconds, the
dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm stop working,
you can open the door completely.
2 Press Start/Cancel button for more than 3 seconds to cancel the program..
Press the Program button to select the desired program.3.
4. Press the Start/Cancel button, then close the door within four seconds, the
dishwasher will startafter 10 seconds.
3 sec
ECO
Starting A Wash Cycle
1. Pull out the lower and upper basket, load the dishes and push them back.
It is recommended to load the lower basket first, then the upper one.
Loading ...
Loading ...
Loading ...