Loading ...
Loading ...
Loading ...
4
Cabinet Dimensions Cabinet tolerances: +1/16 (1.6 mm), -0, unless otherwise stated
Cutout Dimensions Cabinet tolerances: +1/16 (1.6 mm), -0, unless otherwise stated
• Install the junction box so the oven can be removed from the
cutout without being disconnected.
• Plan the installation so all minimum clearances are met or
exceeded. Dimensions shown provide minimum clearances
unless otherwise noted. Ensure proper clearance is provided
for the oven door. (See Product Dimensions.)
• Cabinet cutout dimensions must be followed. The specified
minimum cabinet depth/width must be provided. The cabinet
depth/width must completely enclose the recessed portion of
the oven.
• All contact surfaces between oven and cabinet must be solid
and level.
• Provide a support platform within the cabinet for the oven,
which must be installed level and straight. The top edge of the
platform must be flush with the cutout at the front of the cabi-
net. There is no way to level the oven after installation. 3/4”
(1.9 cm) plywood is recommended.
Single Wall Oven (under-counter install)
Model
(N) Min. Cabinet Width
(P) Cutout Width (R) Cutout Height
HWO127
27” (68.6 cm)
25 5/8” (65.1 cm) min. (recommended) or 26 1/8” (66.4 cm) max.
27” (68.6 cm)
HWO130
30” (76.2 cm)
28 5/8” (72.7 cm) min. (recommended) or 29 1/8” (74.0 cm) max.
HWO227
27” (68.6 cm)
25 5/8” (65.1 cm) min. (recommended) or 26 1/8” (66.4 cm) max.
50” (127.0 cm)
HWO230
30” (76.2 cm)
28 5/8” (72.7 cm) min. (recommended) or 29 1/8” (74.0 cm) max.
Minimum interior cabinet depth: 24” (61.0 cm)
Planning the Installation
WARNING
Observe governing codes and ordinances during planning/installa-
tion. Contact your local building department for details.
IMPORTANT
• Place the junction box so the oven may be easily disconnected if it
must be removed for service.
• Ensure the oven is installed fully level, or it may deliver poor/incon-
sistent baking results.
• Ensure the oven is easily accessible. Verify that electrical
power, meeting the specifications on pg. 4, is available to
the intended location.
• Install the junction box as shown on Pgs 5-6.
INSTALLATION SPECIFICATIONS
Loading ...
Loading ...
Loading ...