Loading ...
Loading ...
Loading ...
u
In the case of an appliance with
enclosed wall spacers, mount the
wall spacers on the back of the
appliance at the top left and right.
u
Dispose of packaging material (see 4.5) .
u
Align the appliance so that it
stands firmly and on a level by
applying the accompanying
spanner to the adjustable-
height feet (A) and using a
spirit level.
When a Side-by-Side appliance (S…) is fitted together with
a second appliance (as a SBS combination):
u
Proceed according to the Side-by-Side combined fridge-
freezer installation instructions. (Accessories bag of the SBS
freezer/appliance with freezer compartment)
Note
u
Clean the appliance (see 6.2) .
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
u
Always see to good ventilation at the installation site.
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
NOTICE
Risk of damage to side-by-side appliances due to condensa-
tion!
When a side-by-side appliance (S…) is fitted together with a
second appliance (as a SBS combination), the door hinges
must remain as delivered.
u
Do not change over the door hinges.
Ensure that the following tools are to hand:
q
Torx® 25
q
Torx® 15
q
Screwdriver
q
Battery-powered screwdriver, if necessary
q
Second person for fitting work, if needed
q
Accompanying Allen key size 2*
4.3.1 Detaching the door
Fig. 4
u
Close the door.
u
Pull off the cover
Fig. 4 (10)
forwards and upwards.
u
Lift off the cover
Fig. 4 (11)
.
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Unscrew the upper turn hinge
Fig. 4 (12)
(2x Torx® 25)
Fig. 4 (13)
and lift it off.
u
Lift off the door and set it aside.
4.3.2 Distinguishing between bearing
elements
Some appliances are height-adjustable, as can be noted from
the bearing pin in the lower turn hinge:
u
For appliances without
height adjustment,
continue with item
(see 4.3.3) .
u
For appliances with
height adjustment,
continue with item
(see 4.3.4) .
4.3.3 Changing the bearing parts
for appliances without height adjustment
Putting into operation
6 * Depending on model and options
Loading ...
Loading ...
Loading ...