Loading ...
Loading ...
Loading ...
GB
7
Electrical Connection
Electrical Connection
Ifyourapplianceissuppliedwitha13amp.fusedplugitcan
bepluggedintoa13ampsocketforimmediateuse.Before
using the appliance please read the instruction below.
WARNING: THIS APPLIANCE MUST BE EARTHED.
THE FOLLOWING OPERATIONS SHOULD BE
CARRIED OUT BY A QUALIFIED ELECTRICIAN.
Replacing the fuse:
When replacing a faulty fuse, a 13 amp ASTA approved
fusetoBS1362shouldalwaysbeused,andthefusecover
re-fitted. If the fuse cover is lost, the plug must not be used
until a replacement is obtained.
Replacemente fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colours as indicated by the coloured marking or the
colour that is embossed in words on the base of the plug.
Replacementscanbeobtaineddirectlyfromyournearest
Service Depot.
Removing the plug:
Ifyour appliance has a non-rewireable moulded plug and you
should wish to remove it to re-route the mains cable through
partitions, units etc., please esure that either:
-theplugisreplacedbyafused13ampre-wireableplug
bearing the BSI mark of approval
- or:
- the mains cable is wired directly into a 13 amp cable
outlet, controlled by a switch, (in compliance
with BS 5733) which is accessible without moving
the appliance.
Disposing of the plug:
Ensure thatbeforedisposingof the plug itself, you make
the pins unusable so that it cannot be accidentally inserted
into a socket.
Instruction for connecting cable to an altenative
plug:
Important: the wires in the mains lead are coloured in
accordance with the following code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
CAUTION:
- Once the appliance has been installed, the electrical plug
and socket should remain accessible.
- The Company shall not be held responsible for any
incidents that occur if these regulations are not observed.
As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminal in your plug, proceed as follows:
connect Green & Yellow wire to terminal market “E” or
coloured Green or Green & Yellow.
Connect Brown wire to terminal marked “L”
orcolouredRed.
Connect Blue wire to terminal marked “N” or coloured Black.
Ifa13ampplug(BS1363)isuseditmustbefittedwitha
13ampfuse.A15ampplugmustbeprotectedbya15amp
fuse, either in the plug or adaptor or at the distribution board.
If you are in any doubt about the electrical supply to your
machine,consultaqualifiedelectricianbeforeuse.
How to connect an alternative plug:
The wires in this mains lead are coloured in accordance with
the following code:
BLUE “NEUTRAL” (“N”)
BROWN “LIVE” (“L”)
GREENANDYELLOW “EARTH” (“E”) or
Disposing of the appliance:
Whendisposingoftheappliancepleaseremovetheplug
by cutting the mains cable as close as possible to the plug
body and dispose of it as described above.
Loading ...
Loading ...
Loading ...