Loading ...
Loading ...
Loading ...
• 11 •
14. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Battery clamps do not
spark when touched
together.
The charger is equipped
with an auto-start feature.
It will not supply current
to the battery clamps
until a battery is properly
connected. The clamps
will not spark if touched
together.
No problem; this is a
normal condition.
All three LEDs come
on for 2 seconds, then
turn off.
The charger is plugged into
an AC outlet.
No problem; this is normal.
The charger will not
turn on when properly
connected.
AC outlet is dead.
Poor electrical connection.
Connections are reversed.
Battery is defective.
Check for open fuse or
circuit breaker supplying
AC outlet.
Check power cord and
extension cord for loose
tting plug.
Unplug the charger and
reverse the clamps. (The
charger will not detect
reversed connections when
the battery voltage is less
than 2V.)
Have battery checked.
I cannot select a 6V or
12V setting.
The charger is equipped
with Auto Voltage
Detection, which
automatically detects the
voltage and charges the
battery.
No problem; this is normal.
Loading ...
Loading ...
Loading ...