Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/19603620-dvlr223et0ww/bgf.png)
Problem Possible Causes What to Do
Overdrying • Try a £_bric softener.
• Adjust controls for less drying.
No fabric softener was used *Try a fabric softener.
Synthetics, permanent press • Try a fabric softener.
and blends can cause static
Improper sorting
• Separate heavy items from lightweight items
(generally, a we]il-sorted washer load is a
well-sorted dryer load).
Large loads of heavy items • Large, heavy loads contain more moisture
(like beach towels) and take longer to dry. Separate large, hea D,
items into smaller loads to speed drying time.
Controls improperly set • Match control settings to the load you
are drying.
Lint f'llter is full • Clean lint filter heft)re every load.
Improper or obstructed
ducting
Blown fuses or tripped
circuit breakers
Overloading/
combining loads
Underloading
• Check installation instructions for proper
ducting/venting.
• Make sure ducting is clean, free of kinks
and unobstructed.
• Check to see if outside wall. damper
operates easily.
• See the Venting the Dryer section.
• Replace fuses or reset circuit breakers. Since
most dryers use '2fllses/breakers, make sure
both are operating
• Do not put more tl_an one washer load in
the dryer at a time.
• If you are dr)qng ordy one or two items,
add a flewitems to ensure proper tUmbling.
15
Loading ...
Loading ...
Loading ...