Loading ...
Loading ...
Loading ...
7
temperature display. Press any key to stop flashing, at the same time had reached the highest
temperature of the freezer will be shown.
Sensor fault alarm
When refrigerators operating screen "E0", "E1", "E2", "EH" and so on, explain fridge sensor fails,
the refrigerator can refrigeration, but please as soon as possible to the fridge for maintenance.
Notes
- If the unit is unplugged or loses power, please wait approximately 3 to 5 minutes before
restarting the unit. If there is any attempt to restart before this time delay, the refrigerator
will not commence operation.
- Large quantities of food stored in the appliance or directly in front of the air vent will hinder
the cooling efficiency of the appliance as this can affect the airflow.
- If you choose to change the thermostat settings in the fridge compartment, adjust the
thermostat control by one increment at a time.
- Allow 24 hours for temperature to stabilize between adjustments. Do not keep opening and
closing the door once increasing the temperature.
Please note different sections of refrigerator compartment may be warmer or
cooler than others – typically the back wall and bottom lowest shelf will be the
coolest, the top door rack will be the warmest. To avoid frost bite, please don’t
put raw vegetables too close to the coolest area.
Loading ...
Loading ...
Loading ...