Loading ...
3
5. With a minimum of two people, place the cooker on the cooker shelf located in the cart. Also, make sure the
cooker is placed on the mounting bracket located on the cart directly under the hinge. The hinge and the inside
damper vent should be used for hand holds. (See Figure 3).
6. Re-install dome, hinge nuts and
washers. Remove shipping screws
from each side of hinge. Replace
inside parts
support bracket
screws
Shelf adjustment screw
Front View
Supports
Leveling the Side Shelves
To level the side shelves, lift the shelf
so that the shelf adjustment screw is
visible between the two supports on
the shelf brackets. Turn the screw
with the included 3/32” (.2 cm) allen
wrench counter clockwise to raise the
shelf and clockwise to lower the
shelf. (See Figure 4)
Figure 4
Damper vent
Cooker shelf
Figure 3
Mounting Bracket
(located behind
cooker on cart
directly under hinge)
Hinge
IMPORTANT: PLEASE READ AND FOLLOW
1. Before beginning, please read these instructions completely and carefully.
2. Do not remove permanently affixed labels, warnings, or plates from product.
To mount the cooker to the cart:
Always wear gloves when installing the cooker. Although the cooker and cart is deburred prior to shipment, some
edges may still be sharp enough to cause injury during handling.
1. Remove the stainless steel side burner cover, side burner grates, burner bowls and grate support. (41” W. models
only)
2. Remove the top from the cart. (See Figure 1)
CAUTION: Keep hands and fingers away fro spring area.
3. Install two (2) shipping screws, (one set on each side). (See Figure 2) Remove the two (2) top nuts and washers on
each side of the hinge mount.
4. Remove all inside parts.
Figure 1
Stainless cover
Grates
Burner bowls
Grate support
Cart top
Remove the (2) top nuts and
washers on each side of hinge
Install (2) shipping screws
(one on each side)
CAUTION
Keep hands and fingers out of
spring area. Lift from bottom
or inside front of hinge.
Figure 2
2
Loading ...
Loading ...
Loading ...