Loading ...
Loading ...
Loading ...
16
FINAL INSTALLATION
7.
Carefully arrange wiring within the fitter plate (H) to
ensure wires do not get pinched when attaching the
LED light kit (F).
Align slotted holes in LED light kit (F) with loosened
fitter plate screws (O) on fitter plate (H). Twist LED
light kit (F) to lock in place. Re-insert the previously
removed fitter plate screw (O) and securely tighten
all fitter plate screws (O).
8.
Align slots on shade (I) with protrusions on
underside of fitter plate (H). Turn shade (I)
clockwise until it no longer turns.
NOTE: Pull down gently on the shade (I) to make
sure it is secured completely.
8
H
9
Remote Control
Bracket
Wall
9.
If you wish to use the remote control bracket from
remote pack (P), install screws from remote pack (P)
through bracket and into the desired installation site.
The remote control transmitter from remote pack (P)
rests inside the bracket.
Bracket
Screws
P
Slot
I
Protrusion
H
7
F
O
Loading ...
Loading ...
Loading ...