Loading ...
Loading ...
Loading ...
• Before you start chain saw, make sure saw chain is not
contacting any object.
• Do not operate a chain saw with one hand! Serious injury to
the operator, helpers, or bystanders may result from one
handed operation. A chain saw is intended for two-handed use only.
• Keep the handles dry, clean, and free of oil or grease.
• Do not allow dirt, debris, or sawdust to build up on the motor
or outside air vents.
• Stop the chain saw before setting it down.
• Do not cut vines and/or small under brush.
• Use extreme caution when cutting small size brush and
saplings because slender material may catch the saw chain and be
whipped toward you or pull you off balance.
WARNING: Some dust created by power sanding, sawing,
_rinding, drilling, and other construction activities contains chemicals
nown to the State of California to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
beadfrom lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a welt ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction activities.
Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get intoyour mouth, eyes, or bayon the
skin may promote absorption of harmful chemicals.
_WARNING: Use of this tool can generate and/or disburse dust,
which may cause serious and permanent respiratory or other
injury. Always use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face
and body.
SAVE THESE INSTRUCTIONS
SYMBOLS
The label on your tool may include the following symbols.
V................ volts
Hz.............. hertz
min ............ minutes
- - -. ......... direct current
[] .............. Class II Construction
z_ ............ safety alert symbol
Features
A .................... amperes
W .................. watts
* .................. alternating current
no .................. no load speed
G .................... earthing terminal
.../min ............ revolutions per
minute
Before using your Chain Saw familiarize yourself with all operating
and safety features.
1. Trigger Switch
2. Lock Off Button
3. Oil Reservoir
4. Oil Reservoir Cap
5. Front Hand Guard
6. Battery
7. Ribbed Bumper
8. Guide Bar
9. Saw Chain
10. Sprocket Cover
11. Allen Head Screws
12. Guide Bar Scabbard
13. Wrench
14. Charger
15. Rear Handle
16. Front Handle
Loading ...
Loading ...
Loading ...