Craftsman 358795020 brushwacker gas line trimmer

User Manual - Page 15

For 358795020.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
REPLACESPARKPLUG
Replace the spark plug each year to
ensure the engine starts easier and
runs better. Set spark plug gap at
.025 in. Ignition timing is fixed and
nonadjustable.
Twist, then pull off spark plug boot.
Remove spark plug from cylinder
and discard.
Replace with Champion CJ-8Y spark
plug and tighten with a 3/4 in. socket
wrench (10-12 ft.-Ibs).
Reinstall the spark plug boot.
REPLACING THE LINE
WARNING: Trimmer head parts that
are chipped, cracked, broken, or dam-
aged in any other way can fly apart and
cause serious injury. Do not use. Re-
place damaged parts before using unit.
Press the tab on the side of the trim-
mer head and twist the lock ring.
Remove the lock ring and tap button.
Tab
L_J Lock Ring
//" "-_7._ Tap Button
Pull the spool out of the trimmer
head. Remove any remaining line.
Clean dirt and debris from all parts.
Replace spool if it is worn or dam-
aged.
Replace with a pre-wound spool, or
replace line using two 20 foot lengths
of .095 inch (2.4 mm) diameter
Craftsman _R_line.
When installing new line on an exist-
ing spool, insert 1/16" of the end of
each line into the anchoring holes in
the bed of the spool.
__)) Anchoring
Arrow
With your finger between the lines,
wrap the lines evenly and and firmly
around the spool in the direction of
the arrow on the spool
Position the lines in the guide slots.
Insertthe ends ofthe lines through exit
holes in the sides ofthe trimmer head.
Place the spool in the trimmer head.
Make sure the lines are not caught
between the rim of the spool and the
wall of the trimmer head.
Reinstall the tap button and lock ring
onto the trimmer head.
Align the lock ring over the catches
on the trimmer head. Push the ring
down and turn until the catches lock
into place.
Catch _ch
Make sure the lock ring is securelyfas-
tened by pulling on it and twisting in
both directions.
WARNING: All catches must be fas-
tened and the lock tab latched in the
lock ring. If installed incorrectly, the
lock ring can fly off and become a dan-
gerous missile.
Pull line extending from trimmer head.
15
Loading ...
Loading ...
Loading ...