Loading ...
Loading ...
Loading ...
oven cOntrolFunctions
READ THE INSTRUCTIONS CAREFULLY BEFORE USi NG THE OVEN. For satisfactory use ofyouroven, become familiar with
the various pad functions of the oven as described below.
CLOCK BAKE TIME
PAD-- Used PAD-- Used to
to set the enter the length of
time of da,_ the baking time.
N
SPEED CLEAN
(SELF-CLEAN) --
Used to select a _
shorter 2 hour Self- : \
Clean cycle time. _e_ x •
SELF-CLEAN PAD--
® ® •
Used to select a longer
3 hour Self-Clean
cycle time.
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean time and timer.
® Oven
0 Preheat
® Door Locked
Oven • • •
TIMER ON/OFF PAD-- START TIME
Used to set or cancel the PAD-- Used to set
minute timer. The minute the desired start
timer does not start or stop time for baking &
cooking. Also, Self-Clean. May be
TIMER ON/OFF pad is used used with BAKE
to set the Continuous Bake TIME to program a
feature, delayed bake cycle.
BAKE PAD--Used
to select the bake
function.
FEATURE INDICATOR
LIGHTS-- These light to
show which feature is in
use.
®-- BROIL PAD-- Used to
_ select the variable broil
function.
OVEN LIGHT PAD--
Used to turn the interior
oven light ON or OFF.
OVEN, PREHEAT & DOOR LOCKED LIGHTS*--The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
CLEAR/OFF PAD-- Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven door
lockout setting.
*Note: The OVEN indicator !ight 0n the e!ectronic disP!ay
will tumON and OFF whe n using the Bake featureand
during preheaL This is n0rma! and indicates that the oven is
cyc!ing to maintain the se!ected baking temperaturei When
the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold _. After 7 seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold _ again for 7 seconds until the control beeps
once.
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to °C (Celsius) or from °C
to °F (control should not be in a Bake or Clean mode):
1. Press _._. " "appears in the display.
A
2. Press and hold the A until "HI" appears in the
display.
3. Press and hold _._ until °F or °C appears in the
display.
4. Press the ,/_ or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
so,.ngo co.,.o
Note: The time of day must first beset in order to 0perate the oven:
To Set the Clock
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
once (do not hold pad down).
1. Press
.
Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
10
Loading ...
Loading ...
Loading ...