Loading ...
Loading ...
Loading ...
Playing CDs
This section uses playback from a CD as an example.
1
Press INPUT SELECT to switch the input source to
“CD”.
“CD” is displayed on the display of this unit.
2
Playback the CD.
3
Press VOLUME df to adjust the volume.
o
Playback in source direct mode
The signal does not pass through the tone adjustment circuitry (BASS,
TREBLE and BALANCE), resulting in playback of a higher sound
quality.
1
Press SOURCE DIRECT on the main unit to turn on
source direct mode.
The SOURCE DIRECT indicator lights.
o
Playback in ANALOG MODE
When the ANALOG MODE is turned on to playback an analog source
(PHONO, CD, NETWORK, AUX, RECORDER, EXT.PRE), power to
the digital input circuit and the display turn off. This enables you to
enjoy high sound quality audio playback without sound quality being
affected by noise that occurs from the digital control circuit.
1
Press ANALOG MODE to turn analog mode on.
0
The ANALOG MODE indicator lights.
Press ANALOG MODE to toggle between “ANALOG MODE Off”,
“ANALOG MODE 1” and “ANALOG MODE 2”.
ANALOG MODE Off: ANALOG MODE is not used.
ANALOG MODE 1: Turns the digital input circuit power off.
ANALOG MODE 2:
Turns the digital input circuit power and
display off.
0
A digital input source (COAXIAL 1/2, OPTICAL 1/2, USB-DAC) cannot be selected
when ANALOG MODE is on.
0
The input source automatically switches to CD if ANALOG MODE is turned on
during playback of a digital input source (COAXIAL 1/2, OPTICAL 1/2, USB-DAC).
0
Communication between this unit and the computer is disconnected if ANALOG
MODE is turned on when a computer is connected to the USB-DAC input
connector of this unit. If the unit cannot communicate with the computer after
turning ANALOG MODE off again, disconnect and reconnect the USB cable or
restart the audio player on the computer.
0
When the analog mode is switched, the mute circuit is activated for about 5
seconds.
Contents Connections Playback Settings Tips Appendix
29
Front panel Rear panel
Remote control
unit
Index
Loading ...
Loading ...
Loading ...