Craftsman 917288611 26.0 HP*, 54" Mower Electric Start Automatic Transmission Lawn Tractor

Operator's Manual - Page 32

For 917288611. Also, The document are for others Craftsman models: 917.28861*

PDF File Manual, 72 pages, Read Online | Download pdf file

917288611 photo
Loading ...
Loading ...
Loading ...
TROUBLESHOOTINGCHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE CORR'ECTION
Will not start 1 Fill fuel tank.
Hard to start
Engine wi'l'lnot
turn over
1
2
,3
4
5
6
7
8
9
10
Out of fuel.
Engine not "CHOKED" properly.
Engine flooded.
Bad spark plug.
Dirty air filter.
Dirty fuel filter.
Water in fuel.
Loose or damaged wiring.
Carburetor out of adjustment.
Engine valves out of adjustment.
2 i See 'qO START ENGINE" in
Operation section.
a Wait several minutes before
attempting to start.
4 Replace spark p{ug.
5 Clean!rePlace air fiJter.
6 Replace fuel filter.
7 Empty fuel tank and carburetor,
refill tank with fresh gasoline and
replace fuel filter.
8 Check all wiring.
9 See "To Adjust Carburetor" in
SerVice and Adjustments section.
10 Contact a Sears or other qualified
service center.
1
2
3
4
5
,6
_7
Dirty air filter.
Bad spark plug.
Weak or dead battery.
Dirty fuel filter.
Stale or dirty fuel.
Loose or damaged wiring.
Carburetor out of adjustment.
1
2
3
4
5
6
7
Clean/replace air filter.
Replace spark plug.
Recharge or replace battery.
Replace fuel filter.
Empty fuel tank and refill tank witt
fresh, clean gasoline.
Check all wiring.
=See "To Adjust Carburetor" in
Service and Adjustments section.
_8
Engine valves out of adjustment.
1 Clutch!brake pedal not depressed.
2 Attachment clutch is engaged.
3 Weak or dead battery.
4 Blown fuse.
5 Corroded battery terminals.
6 Loose or damaged wiring.
7 Faulty ignition switch.
8 Faulty solenoid or starter,
9 Faulty operator presence
switch(ea),
8 Contact a Sears or other qualified
service center.
1 Depress clutch!brake pedal.
2 Disengage attachment clutch.
3 Recharge or replace battery.
4 Replace fuse.
5 Clean battery terminals.
6 Check all wiring.
7 ' Check!replace ignition switch.
8 Check/rep{ace solenoid or starlet.
9 Contact a Sears or other qual{fied
service center.
32
Loading ...
Loading ...
Loading ...