Loading ...
Loading ...
Loading ...
- 9 -
10/2019
Copyright © 2019, Fast ČR, a.s.
QUICK GUIDE TO PROCESSING INGREDIENTS
■ The food processing times provided below are only areference. The actual processing time depends on the size of the ingredients, their amount and the required final consistency.
If the required consistency is not achieved during the maximum operating time of the appliance, you may continue processing the food after the appliance has cooled down.
INGREDIENTS AMOUNT SPEED SETTING PROCESSING TIME
Baby food 300 g Medium to maximum 45 s
Spreads 200 g Medium to maximum 30 s
Fruit and vegetables (cooked) 200 g Medium to maximum 45 s
Sauces 500 ml Medium to maximum 45 s
Shakes 500 ml Medium to maximum 30 s
Meat 300 g Medium to maximum 30 s
Fruit and vegetables 200 g Medium to maximum 15 s
Hard and semi-hard cheeses 150 g Maximum 10 s
Hard baked goods 100 g Medium to maximum 20 s
Nuts with shells removed 100 g Maximum 15 s
Herbs 50 g Medium 10 s
■ First, cut up the food into approximately 2 cm cubes and only then blend it. With vegetables like onion, it is sufficient to cut them into quarters.
CLEANING AND MAINTENANCE
■ Before cleaning it, make sure that the appliance is turned off, disconnected from the power socket and that the rotating parts have stopped.
■ Disassemble the appliance into its individual parts. Thoroughly wash the used blender attachment and beaker in warm water using neutral kitchen detergent. Then rinse them
with clean water and allow them to dry naturally or dry them out thoroughly using awiping cloth.
■ When cleaning the blender attachment A4, do not submerge the top end that connects to the motor unit A3.
■ The beaker A6 and the anti-slip base pad A7 can be washed in adishwasher. Other parts are not intended for washing in adishwasher.
Attention:
When cleaning the blade assembly A5, be very careful not to injure yourself on its sharp edges.
■ After finishing using the blade assembly A5, it is also possible to clean it by submerging it in warm water with kitchen detergent, and running it for ashort time. Then disconnect
the appliance from the power socket, disassemble it, and rinse the blade assembly with clean drinking water and dry it thoroughly.
■ To clean the outer surface of the motor unit A3, use acloth lightly dipped in aweak detergent solution. After applying the detergent solution, wipe the surface with acloth
lightly dampened in clean water and then wipe dry. Do not use solvents, abrasive cleaning products, etc. for cleaning the appliance. Otherwise the surface coat of the appliance
may be damaged.
Attention:
Never submerge the motor unit A3 or the power cord in water or in any other liquid.
STORAGE
■ When you have finished using the appliance, place it and its accessories in aclean, dry place out of children’sreach. Keep the stored appliance and its accessories away from
extreme temperatures, direct sunlight and excessive humidity and do not store it in an overly dusty environment.
TECHNICAL SPECIFICATIONS
Rated voltage range ................................................................................................................................................................................................................................................................................................... 220–240 V
Rated frequency ..............................................................................................................................................................................................................................................................................................................50/60 Hz
Rated power input .............................................................................................................................................................................................................................................................................................................. 800 W
Electrical shock protection class ............................................................................................................................................................................................................................................................................................... II
Noise level .......................................................................................................................................................................................................................................................................................................................... 73 dB(A)
The declared noise emission level of the appliance is 73 dB(A), which represents alevel Aof acoustic power with respect to areference acoustic power of 1 pW.
EXPLANATION OF TECHNICAL TERMINOLOGY
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
Changes to text and technical parameters are reserved.
Loading ...