Kenmore 79095301104 Electric Range

Use & Care Guide - Page 8

For 79095301104. Also, The document are for others Kenmore models: 790.92413*, 790.95200*, 790.95201*, 790.95202*, 790.95204*, 790.95300*, 790.95301*, 790.95302*, 790.95304*, 790.95309*, 790.95410*, 790.95411*, 790.95412*, 790.95413*, 790.95414*, 790.95415*, 790.95419*

PDF File Manual, 22 pages, Read Online | Download pdf file

79095301104 photo
Loading ...
Loading ...
Loading ...
Before Setting Oven Controls
ELEME_ 0_
Element On and Hot Surface Indicator Lights
Your range is equipped with two different surface control lights thatwill glow on your range--
the Element On indicator light and a Hot Surface indicator light.
The Element On located on the control panel, will glow when any surface element is turned
on. A quick glance at this light after cooking is an easy check to be sure all surface controls
are turned off.
The Hot Surface indicator light, located on the control panel, will glow as the surface cooking
area heats up and will REMAIN ON until the glass cooktop has cooled to a MODERATE level.
Setting Oven Controls
To Operate Single Radiant Surface Elements
1.
2.
3.
Place correctly sized cookware on the radiant surface element.
Push in and turn the surface control knob in either direction to the desired
setting. Start most cooking operations on a higher setting and then turn to a
lower setting to finish cooking. The surface control knobs do not have to be
set exactly on a particular mark. Use the marks as a guide and adjust the
control knob as needed. Each surface element provides a constant amount of
heat at each setting. A glowing red sudace heating area extending beyond the
bottom edge of the cookware indicates the cookware is too small for the
surface heating area.
When cooking iscompleted, turn the surface element off before removing the
cookware. Note: the Element On indicator light will glow when one or more
elements are turned on. A quick glance at the indicator light(s) when cooking
isfinished isan easy check to be sure all control knobs are turned off. The Hot
Surface indicator light will continue to glow AFTER the control knob is turned
to the "Off" position and will glow until the heating surface area has cooled
sufficiently.
Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may
still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.
rt_[=_'_j_ Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top
of the range when it is in use. These items could melt or ignite. Potholders, towels orwooden spoons could catch fire if placed
too close to the surface elements.
8
Loading ...
Loading ...
Loading ...