Loading ...
Loading ...
Loading ...
The water dispenser will not operate properly
Check the following:
• Is the freezer door closed completely?
• Is the water shutoff valve not turned on, incorrectly installed or
clogged?
Is the water line connected at the source?
is there a kink in the home water source line?
Has the water system not filled? The water system needs to
be filled the first time it is used.
• Is the refrigerator connected to a cold water line with
water pressure of at least 30 psi? The water pressure to the
home determines the flow from the dispenser.
• Is there a water filter installed on the refrigerator? The filter
may be clogged or incorrectly installed.
• Is a reverse osmosis water filtration system connected to
your cold water supply? See "Water Supply Requirements"
in either the Installation Instructions or the Use & Care Guide.
Water is leaking from the dispenser
Check the following:
• Is the glass not being held under the dispenser long enough?
• Has the water system been flushed since installation or
changing filters?
The dispenser water is not cool enough
NOTE: Water from the dispenser is only chilled to 50°F (10°C).
• Has the refrigerator been newly installed or a large
amount of water recently dispensed? Allow 24 hours for the
refrigerator to cool completely.
• Has water not been recently dispensed? The first glass of
water may not be cool. Discard the first glass of water.
WATERFILTERCERTIFICATIONS
Sla(e of California
I)epal tn'_cnt of Health Sel vices
Water Treatment Device
Certificate Number
04- 1635
Date Issued: April 8, 2004
Trademark/Model Designation
Whirlpool T] WB2
Re_laeenlentEl_nlonts
RatedServiceCapacity: 2O0 gal_ RatodServicoFlow: 05gpm
Conditions of Certification:
Do no_ u_e where water l_ mlc_blok)glcalIy unsafe ul with water _,t¸ unknown quahty, exc_p_ that _ystem_ ccmh_d fi_
cyst reductEo_ may be used un dEslnfectcd watcr_ that may _o_tam f_)te_aNe cyst_
10
Loading ...
Loading ...
Loading ...