Loading ...
Loading ...
Loading ...
5. HEALTH AND SAFETY INFORMATION
Wait for the machine to stop. Unless the machine is fitted with a safety brake, some parts may
continue to move due to momentum. Wait for all parts to stop, then unplug it from the power supply
before making any adjustments, carrying out maintenance operations or just finishing using the
tool.
Remove and check setting tools. Some machinery requires the use of additional tools or keys to
set, load or adjust the power tool. Before starting the power tool always check to make certain they
have been removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make sure
the switch is in the OFF position. If the machine is portable, do not hold the machine near the
switch and take care when putting the machine down, that nothing can operate the switch.
Carefully select an extension lead. Some machines are not suitable for use with extension
leads. If the tool is designed for use outdoors, use an extension lead also suitable for that
environment. When using an extended lead, select one capable of handling the current (amps)
drawn by the machine in use. Fully extend the lead regardless of the distance between the power
supply and the tool. Excess current (amps) and a coiled extension lead will both cause the cable to
heat up and can result in fire.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power
tool if you are under the influence of drugs (prescription or otherwise), including alcohol or if you
are feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to conform to the relevant
international and local standards and as such should be maintained and repaired by someone
qualified, using only original parts supplied by the manufacturer. This will ensure the tool remains
safe to use.
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR PRESSURE WASHER USE
Warning!
− This appliance is for outdoor use only.
− Always disconnect the electricity and water supplies on completion of every job.
− Never use the appliance if the electrical cable or important parts of the appliance are damaged,
e.g. safety devices, high pressure hose, gun, etc.
− This appliance has been designed for use with a neutral shampoo based on biodegradable
anionic surface active detergents. The use of other detergents or chemicals may put the
appliance’s safety at risk.
− Never use the appliance with people in the vicinity, unless they are wearing protective clothing.
− Do not direct the nozzle toward mechanical parts containing lubricant grease, as the grease
will dissolve and spread over the surrounding ground. Vehicle tyres/tyre valves may only be
cleaned from a minimum distance of 30cm, otherwise the vehicle tyre/tyre valve could be
damaged by the high-pressure jet. The first indication of this is a discolouration of the tyre.
Damaged vehicle tyres/tyre valves can be deadly dangerous.
− High pressure jets may be dangerous if improperly used. Jets must never be pointed at people,
animals, live electrical equipment or the appliance itself.
− The hoses, accessories and high pressure couplings are important for the appliance’s safety.
Use only hoses, accessories and couplings recommended (it is extremely important to protect
these components against damage by avoiding their improper use and protecting them against
bending, knocks and scratches).
− The gun is fitted with a safety catch. Whenever use of the machine is interrupted it is important
to operate the safety catch to prevent accidental activation of the jet.
− Never point the jet at yourself or others to clean clothing or footwear.
− Never allow children or untrained people to use the appliance.
– 8 –
Loading ...
Loading ...
Loading ...