Loading ...
Loading ...
Loading ...
c
@c
c
ø@ è*è*è*è*è*è*è*è*
+
@è*è*è*è*è*
7
@*è*è*è*è*è*
cø@c è*è*è*è*è*è*
+@è*è*
9@è*è*è*
W
A
a
a
a
u
a
1.
2.
3.
Do not operate the dryer if
9
Technical data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approximately 45 kg
Max. capacity 7 kg
Condensation container 4.2 l
Connection voltage
Connected load
Fuse protection see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. Fluctuations up to 10% are possible. The value
on the label is achieved at the maximum heat setting.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
Cottons+Linens 7 kg 10 A 16 A 10 A 16 A
+ (Cupboard Dry) * 1400 (approx. 50 %) 112 89 3.36 3.36
1000 (approx. 60 %) 131 104 3.92 3.92
800 (approx. 70 %) 150 120 4.48 4.48
c(Iron Dry) * 1400 (approx. 50 %) 93 69 2.42 2.42
1000 (approx. 60 %) 111 82 3.06 3.06
800 (approx. 70 %) 130 94 3.70 3.70
Synthetics 3.5 kg
+ (Cupboard Dry) * 800 (approx. 40 %) 48 42 1.35 1.35
600 (approx. 50 %) 60 51 1.65 1.65
*Test program according to DIN EN 61121.
**The values may differ from the those specified depending on the type of fabric, mixture of
laundry to be dried, residual moisture in the fabric and loading capacity.
ʠ
Drum interior light (depending on model) (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and also after the programme is
started. It goes out automatically. Replacing the bulb
a
Page 10.
Optional accessories (order from the after-sales service using the order number)
Connection fittings for condensation outlet
The condensation is conveyed directly via a hose.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WZ 20300.
Installation underneath the worktop
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
WZ
20160
WZ
20310
WZ
20290
10
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always
find an appropriate solution and will avoid unnecessary visits by engineers. Trust the
expertise of the manufacturer and rest assured that the repair will be carried out by trained
service technicians using original spare parts. The contact details of your local after-sales
service can be found in the enclosed after-sales service directory, or by calling one of
these numbers:
– GB 0844 8928989 Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E
no.) and production number (FD) (see the inside of the door).
Set the programme selector to (Off) and remove the appliance plug from the socket.
ʠ
The uStart/Stop indicator
lamp does not light up.
Mains plug plugged in?
Programme selected?
ʠ
The - (Container) and
uStart/Stop indicator lights
are flashing.
Empty the condensation container.
If featured, check hose for condensation outlet.
ʠ
The v (Filter) and
uStart/Stop indicator lights
are flashing.
Clean the fluff filter and/or air cooler
a
Page 4/6.
ʠ
Dryer does not start. uStart/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is running out. Align dryer horizontally.
Clean air cooler seal.
ʠ
The door opens by itself. Push the door closed until you hear it engage.
ʠ
The required degree of
dryness was not achieved or
the drying time was too long.
Clean the fluff filter and/or air cooler
a
Page 4/6.
Empty condensation container
a
Page 4.
Check water outlet (if featured).
Ambient temperature higher than 35 °C
a
airing.
Air inlet may be blocked
a
keep unobstructed.
Was an unsuitable programme selected?
a
Page 7.
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Fine layer of scale on the moisture sensors
a
Clean the
moisture sensors
a
page 6.
ʠ
Laundry damp. Use the next drying programme up or use the timer
programme as a supplement
a
Page 7.
Warm laundry feels damper than it really is!
ʠ
The moisture content of the room
has increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
keep unobstructed.
Ensure that the air cooler has been inserted.
ʠ
Mains failure. Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate.
ʠ
One or more indicator lights for
programme status are
flashing.
Clean filter and air cooler
a
Page 4/6.
Check installation conditions
a
Page 8.
Switch off, leave to cool down, switch on again, restart
programme.
ʠ
The interior light is not working
(depending on model).
Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 screw driver) and
replace the bulb. Close the cover cap.
Never operate the dryer without a cover cap.
a
a
a
a
a
a
a
a
a
a
Loading ...