Loading ...
Loading ...
Loading ...
10
|
SEDONA ISlAND ASSEmbly INStructIONS
SEDONA ISLAND ASSEMBLY INSTRUCTIONS
We recommend a qualied, trained gas service technician
perform all pipe tting and gas leak test procedures prior to
installing the refrigerator. Once installed there will be limited
access to the gas piping. Before installing the side burner,
familiarize yourself with the illustration on the next page.
Wrap the side burner manifold threads with Teon tape,
see Fig. 1 on page 11. Remove the 1/2” FIP tting from
the exible hose and install it on the side burner manifold.
Attach the stainless steel exible hose to the 1/2” FIP tting
at the end of the side burner manifold.
Clear plastic replacement extension tubes are provided
in the Open Me First box to drain spills and drain water
from the side burner. Set the side burner in place in the
counter top cutout. Be sure to keep the side burner wiring
accessible to attach to the grill once it is installed. Route the
tubes through the holes in the rear center of the island base
for drainage out of the island.
On the bottom of the side burner locate the center Philips
head screw on each side of the burner base. Remove the
screw and install the side burner mounting bracket with it
(Part No. 13, note weld nut position) ange up, as shown to
the right. Screw the side burner mounting screw (Part No. 4)
into the weld nut, and install the side burner mounting hex-
nut (Part No. 3) on the screw. Tighten the screw up to the
side burner bracket frame to secure the side burner in place.
Use the hex nut to lock the screw into position.
Step 9
Locate and remove the plug from the 1/2” Tee tting in the
grill manifold to facilitate the side burner connection (see
the drawing on the next page).
With the help of an assistant set the grill in place. Make
sure to align the grill evenly and be sure it is fully supported
on the mounting anges. Before sliding the grill back
completely, reach behind the grill and attach the electrical
wiring from the side burner using the attached Molex
connectors (See page 13).
Step 10
Install the Grill
Install the Side Burner
Loading ...
Loading ...
Loading ...