Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
86
Connecting the electricity supply
Observe the information under
“Electrical connection”.
Connect the coffee machine to the
electricity supply.
Pushing in and aligning the coffee
machine
Take care not to trap or damage the
electrical connection when pushing
the machine into the niche.
Push the coffee machine all the way
into the niche until you feel a
resistance.
Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the appliance if
necessary.
Never align the coffee machine by
adjusting the door hinges. This will
prevent the milk flask from attaching
correctly and interfere with the milk-
preparation process.
Now screw the coffee machine to the
cabinet.
Open the appliance door.
TwoTX20 (25mm) screwsare
included with the machine.
Secure the coffee machine to the side
walls of the cabinet using the screws
supplied. Tighten both screws by
hand.
Tip: To make it easier to attach the
screw on the left, you can remove the
door opening limiters and increase the
door opening angle to approx.170°
(see “Door opening limiters”). Make
sure that there is sufficient space
available and that the machine door is
not going to hit an adjacent wall.
Carry out a functional check on the
coffee machine.
Door opening limiters
The coffee machine door hinges are
equipped with door opening limiters
that restrict the opening angle of the
machine door to approx.120°. This will
prevent the machine door from hitting
an adjacent wall and being damaged
when opened.
Loading ...
Loading ...
Loading ...