Loading ...
Loading ...
Loading ...
FINAL INSTALLATION
15
5.
Remove finial (S), finial plate (R), hex nut (O), flat
washer (P) and rubber washer (N) from the
threaded rod at the bottom of the light kit fitter (F).
Save for later use.
5
Threaded
Rod
S
R
P
F
O
N
Install bulbs (Q).
CAUTION: When replacing bulb(s), allow
bulb(s) and shade (I) to cool down before touching.
6.
7.
Place rubber washer (N) that was previously
removed inside shade (I) over center hole. Align
hole in center of shade (I) with threaded rod on light
kit fitter (F), allowing pull chains to come through
corresponding holes in shade (I). Push up gently on
shade (I) until threaded rod comes through hole.
(Be sure fan pull chain does not rub against bulbs
during fan operation.)
Re-install flat washer (P) and secure shade (I) with
hex nut (O). Align pull chains with holes in finial
plate (R) and then re-attach finial (S).
CAUTION: Do NOT overtighten hex nut (O) or
finial (S) as shade (I) may crack or break.
7
S
O
R
I
N
P
F
Threaded
Rod
6
Q
Q
Loading ...
Loading ...
Loading ...