For more products please visit www.smartpointco.com
FCC ID: 2AJ3WEBEQPW69
USER MANUAL
SmartBulb
For more products please visit www.smartpointco.com
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.
For more products please visit www.smartpointco.com
SPECIFICATIONS
Model: SPSBW-FB
Bulb Type: A19
Socket Type: E26
Operating Voltage: AC 110-130V
Power: 9W
Beam Angle: 200°
Watt Equivalent: 60W
Wireless type: Wi-Fi 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
Bulb Size: 60x110mm
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service: 732-994-2301; email: [email protected]
©Smartpoint LLC,
250 Liberty Street, Suite 1A
Metuchen, NJ 08840
Manufactured, marketed and distributed by Smartpoint LLC, under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android, Google Play and Google Home are trademarks of Google LLC.
App Store
®
is a registered trademark of Apple, Inc.
All trademarks and registered trademarks are property of their respective owners.
Made in China
FEATURES
• Wi-Fi remote controlled
• Cool White (Daylight)
• Dimmable & Programmable with Schedule
• App and Voice Control
• Works with Hey Google or Amazon Alexa
Items included in package:
Smart Bulb and User Manual.
DOWNLOAD APP
1. Android™: download “Smartpoint Home” app
on Google Play.
2. iPhone: download “Smartpoint Home” app
from the App Store.
Smartpoint Home
REGISTRATION AND LOGIN
1. Run the “Smartpoint Home” app from your
smart phone.
2. Sign up and login.
*
Screenshots may slightly differ from actual app.
*
ADD DEVICE
1. Make sure phone is connected to your
Wi-Fi network and that it is a 2.4GHz network
and make sure Bluetooth is turned on.
2. Screw in the Smart Bulb into the light socket.
Wait 5-7 seconds for light to blink rapidly.
It is now in set up mode and you can proceed
to step 3. To manually put it into set up
mode, turn the light switch on/off about
4-5 times and then leave on. The light should
then be blinking rapidly.
3. From the home screen of the App, press the
(+) symbol in the top right corner.
5. Make sure your phone is connected to the
Wi-Fi network that the device will be
connected to. Enter your password for the
correct Wi-Fi network and press confirm.
4. A pop up window will automatically appear
asking to add the Smart Bulb. Press “Go to
add”. On the next screen, click on the (+) icon.
6. Connecting process will begin. Do not turn off
the Smart Bulb or phone while connecting.
Wait for connection process to complete.
7. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Smart Bulb is ready for use.
5. Make sure your phone is connected to the
Wi-Fi network that the device will be
connected to. Enter your password for the
correct Wi-Fi network and press confirm.
4. A pop up window will automatically appear
asking to add the Smart Bulb. Press “Go to
add”. On the next screen, click on the (+) icon.
CONTROLLING THE DEVICE
When the smart bulb is selected from the main screen you
have the ability to control it.
Press the light icon to turn it on and off.
Use the slider to adjust the brightness.
You can also set a daily schedule for your smart bulb at the
bottom of the app screen.
PUSH NOTIFICATIONS
1. You can turn on/off notifications for all devices
connected to app by clicking on the “Me” button at the
bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn
access notification settings.
REMOVE A DEVICE
1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.
How to control the Smart Bulb with Amazon Alexa
Please make sure that your Alexa app is
connected to your Amazon Echo and both
work together successfully on your Wi-Fi
home network.
Step A. Log into your Alexa app, tap bottom
right corner, and then tap “Skills & Games”.
How to control the Smart Bulb with Amazon Alexa
Step E. Wait a few seconds for Alexa to detect the Smart Bulb
from the Smartpoint Home app and you will find the device
named “Smart Bulb” has been paired to Alexa app from
“Smartpoint Home” app. Follow the on-screen instructions to
further set up the device.
The bulb will be named whatever you named it in the
Smartpoint Home App.
Step B. Type “Smartpoint Home”, find “Smartpoint Home” app
in the search results and tap and then tap “enable to use”.
Step C. Enter your account info for the “Smartpoint
Home” app, tap “Link Now”, then tap “Smartpoint
Home” and tap “Link Now” again. On the next page
press “Authorize” to link Smartpoint Home account to
Alexa.
Step D. Once your Smartpoint Home account is successfully
linked to Alexa, the next page will pop up. Tap ”Close” at the
bottom and then tap “Discover Devices” on the next page at the
bottom right.
Step E. Wait a few seconds for Alexa to detect the Smart Bulb
from the Smartpoint Home app and you will find the device
named “Smart Bulb” has been paired to Alexa app from
“Smartpoint Home” app. Follow the on-screen instructions to
further set up the device.
The bulb will be named whatever you named it in the
Smartpoint Home App.
Step D. Once your Smartpoint Home account is successfully
linked to Alexa, the next page will pop up. Tap ”Close” at the
bottom and then tap “Discover Devices” on the next page at the
bottom right.
After Step E is done, you can now control the Smart Bulb with
Alexa app from the devices page.
Step F. Now you are able to control the Smart Bulb via
Amazon Alexa with your voice.
Try these commands and see what happens by
asking Alexa:
• Alexa, turn on “Smart Bulb”
• Alexa, turn off “Smart Bulb”
Note: The device name is the one you give to the
smart bulb on “Smartpoint Home” app. Let’s name it
“Living Room”.
For example, now you can say:
• “Alexa, make the Living Room Blue”,
• “Alexa, make the Living Room Red”, etc.
Any device you connect to the Smartpoint Home App
should automatically be added to Alexa. If it does not
add automatically, ask Alexa to discover devices.
1. Pair Smart Bulb with Smartpoint Home App
and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
Account info.
Step A. Once you are logged into your Google Home App,
press the (+) icon in the top left hand corner.
How to control the Smart Bulb with Google Assistant
1. Pair Smart Bulb with Smartpoint Home App
and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
Account info.
Step B. On the next page press “Set up device”, and then on
the page after that select “Works with Google”.
How to control the Smart Bulb with Google Assistant
Step C. Press the magnifying glass icon to type in the app
you would like to link to your Google Home account. In this
case, type in “Smartpoint Home” and then select it from the
list below.
Step D. Enter your account info for the “Smartpoint Home”
app, tap “Link Now”. On th next page select the correct app
to link and then press “Link Now” again.
Step E. Tap “Authorize” on the next page to link your
Smartpoint Home Account with Google Assistant. After that
you will see any devices that are connected to your
Smartpoint Home App. Choose the device you would like to
add to the Google Home App and press “Next”.
Step F. Select the home you would like the device to be
linked to and then select which room you would like the
assign it to.
Step G. Your device is now linked to your Google Home App.
You can now control it through the Google Home App on
your phone or through a Google Assistant-enabled speaker.
Step H. You also are able to control the Smart Bulb via
Google Assistant with your voice.
Just start with “Hey Google”.
“Turn on Sma Bulb”
“Turn o Sma Bulb”
Note: The device name is the one you give to the
bulb on the “Smartpoint Home” App .
Let’s name it
“Living Room”.
For example:
“Turn on Living Room”
“Turn o Living Room”
