Loading ...
Loading ...
Loading ...
Family settings: Allows you to customize your family settings.
For example, you can edit your family name or invite
additional parents or guardians.
App settings: Allows you to customize app settings, enable Kid
Mode, and view legal and regulatory information.
Help: Includes device care, videos, and other helpful
information.
Kid Settings
From the Garmin Jr. app, select your child, and select Settings.
Settings: Allows you to customize device settings. You can turn
on or off alert tones, change the watch face and steps icon,
and configure the emergency contact information.
Register an Accessory Band: Allows you to register an
accessory band and unlock a new adventure map.
Device Information
Specifications
Battery type User-replaceable CR2025 battery
TIP: To replace the battery, go to Replacing
the Battery, page 3.
Battery life Up to 1 yr.
Operating temperature
range
From -15º to 45ºC (from 5º to 113ºF)
Radio frequency Bluetooth technology, 2.4 GHz @ 2 dBm
nominal
Water rating 5 ATM
1
Software Update
When a software update is available, your device automatically
downloads the update when you send data to your smartphone
(Sending Data Manually to Your Smartphone, page 2).
A progress bar and appear on the vívofit jr. 3 device during
the update process. The update can take several minutes. You
should keep the device near your smartphone during the
update. When the update is complete, your device restarts.
Viewing Device Information
You can view the unit ID and software version.
1
Hold the key to view the menu.
2
Hold .
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not place in high temperature environments, such as a
clothes dryer.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
1
The device withstands pressure equivalent to a depth of 50 m. For more
information, go to www.garmin.com/waterrating.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.
User Replaceable Batteries
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Replacing the Battery
The device uses one CR2025 battery.
1
Remove the device from the band.
2
Use a small Phillips screwdriver to loosen the four screws on
the back of the device.
3
Remove the rear case and battery.
4
Insert the new battery with the positive side facing the rear
case.
5
Verify the gasket is not damaged and that it is fully seated in
the front case.
6
Replace the rear case.
7
Tighten the four screws equally and firmly.
8
Insert the device into the flexible silicone band by stretching
the band material around the device.
The device key must be aligned with the key insert on the
side of the band.
Device Information 3
Loading ...
Loading ...
Loading ...