Frigidaire FAA064P7A2 air conditioner

User Manual - Page 5

For FAA064P7A2.

PDF File Manual, 12 pages, Download pdf file

Loading ...
Loading ...
Loading ...
÷
÷
To reduce the risk of fire, electric shock, or injury to persons, read the FMPORTANT
SAFETY INSTRUCTFONS before operating this appliance.
Operation of Current
Device
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
o Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. FtMUST be replaced by one obtained from
the product manufacturer.
Key Features
(On some mode_)
Mumti-Step Fan and Cooling Speeds:
90 distinct fansettings give the ultimate inairflow and noise control
Clean Air:
An ionicair filtration system that substantially increases the air-cleaningefficiency overconventional air
filters,
The OmeanAir button on the air conditioner Touch Pad ONLY activates this feature.
Air Conditioner Features
ON/OFF j LIGHT
ELECTRONIC CONTROL OPERATmNG INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
touch pad a_one or with the remote.
ACTIVATES
TIMER
REMOTE CONTROL
Fig."A"
ADJUSTS
TEMP &
TIMES
ACTIVATES
REMOTE
THERMOSTAT
Fig. "B"
REMOTE CONTROL
w/DISPLAY &
REMOTE SENSING
BUTTON
ACTIVATES
TIMER
CHECK FILTER--
RESET BUTTON
SETS MODE
CLEAN AiR FEATURE ._
(some mode_s)
TOUCH PAD
DISPLAYS
TEMPERATURE/TIME
FAN SPEED
SETS FAN SPEEDS
AUTO COOL FEATURE
SLEEP MODE
_REMOTETEMR
BENBRNGINDICATOR
(SOME MODELS)
--_ TURNS UNIT
ON OR OFF
÷
SZ000302(En)-YaoKong(1018) 5 _ 10/25/2004, 2:33 PM
Loading ...
Loading ...
Loading ...