Loading ...
Included with Impact-VCB-E are two applications:
- WinTV v7, which is used for displaying live video on your PC screen and to create
video recordings,
- ArcSoft ShowBiz, to capture your analogue videos, edit them and burn to Video DVD.
When recording live video with the WinTV v7 application, Impact-VCB-E creates a .TS
(transport stream) file. Using options in the WinTV v7 application, you can also create
.MPEG files.
ArcSoft ShowBiz can capture your analogue videos to disk, edit them and burn to Video
DVD, also allow to post videos on YouTube.
Impact-VCB-E which uses BDA capture devices, which will be compatible with most
video applications which use WDM capture devices.
Installation Overview:
1. Install the IMPACT-VCB-E board in your PC and connect AV cables.
2. Install IMPACT-VCB-E Windows device driver.
3. Install the WinTV7 and ArcSoft ShowBiz application.
4. Begin setting up WinTV 7.
5. Using the WinTV7 Application.
6. Create Video DVD's with ArcSoft ShowBiz
1. Install the IMPACT-VCB-E board in your PC and connect AV cables.
To install, switch off the computer and remove the computer cover. The
manufacturer of your PC supplies instructions on removing the PC cover.
• Locate a free PCIe slot
(a short white slot). Unscrew
and remove the metal cover
plate which covers the back of
the empty slot.
• Plug the WinTV board into the
PCIe slot, and screw the
WinTV metal cover plate to
the PC’s chassis.
• Connect your A/V source
(Composite or S-Video) to the
Impact-VCB-E board.
Note: Your PC could be damaged by electrostatic discharge. Avoid this by contacting
the earthed chassis of your PC, before you open it or touch the PCIe card.
Note: If you are using a low profile computer or chassis, you can replace the full height
bracket on the Impact-VCB-E with the supplied half height bracket to fix into your low
profile systems chassis.
Loading ...
Loading ...
Loading ...