Loading ...
Loading ...
Loading ...
OPERATING CONTROLS
START
Press START to start your washer after
a cycle has been selected. Be sure all
desired cycle adjustments and options
have been selected.
DELAY
You can use the DELAY feature to
temporarily stop the washer cycle
or to delay the start of a wash cycle
for up to nine hours.
To temporarily stop the wash cycle:
STEP 1. Press DELAY. The indicator
light for START will blink. Continuation
of the cycle can be delayed for up to
15 minutes.
STEP 2. Press START to resume the
cycle. If you do not press START within
15 minutes,, the washer will automatically
shut off.
To delay the start of the wash cycle:
STEP 1. Load the washer and fill the
dispensers.
STEP 2. Close the washer lid.
STEP 3. Select the desired cycle fabric
care settings and option selections.
STEP 4. Press DELAY. 1H (one hour) will
be displayed in the TIME REMAINING
window. The indicator lights for START
and DELAY will glow.
STEP 5. i--or a longer delay time, pres=
MORE below the TIME REMAINING
display window. The time will increase
in one ho,Jr steps up to nine hours.
STEP 6. For a shorter delay time, pres
LESS below the TIME REMAINING
display window. ThE, time will decrease
in one hour steps.
NOTE: Do not press START. The
washer will automatically start after
the selected delay time has passed.
To cancel DELAY do any
of the following:
• Press SfART to begin the cycle
immediately.
• Press OFF to turn the ,washer off.
• Press one of the pads under CYCLES
to select a new cycle.
OFF
Selecting this control turns the washer
off. It cannot be restarted from where
it was stopped in the cycle.
• Reset the washer to SPIN to empty
water from the basket.
= Reset to _.wash cycle to continue
washing the load.
_OPTIONS
D
START
0
DELAY
OFF
STATUSm
I
SOAKING
Q
WASHING
Q
SPINNING
J
_.J
3O
Loading ...
Loading ...
Loading ...