Amana ART6114LL/P1143675NLL electric range

User Manual - Page 22

For ART6114LL/P1143675NLL.

PDF File Manual, 28 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Cleaning
Part
Bake and broil,
element
Broiler pan and
grid
Burner bowls
Coil element
Control knobs
Smoothtop
Inside oven door
and front frame
Outside finish
and backguard
Oven interior
surfaces
Oven racks and
storage drawer
Materials to Use General Directions
Soap and a nonabrasive
plastic scouring pad
Soap and water
Soap and water
Mild soap and water
Soap and water or
smoothtop cleaner
conditioner
Soap and water
Soap and water
Soap and water
Soap and water
Do not clean bake element or broil element. Any soil will burn
off when element is heated. Bake element is hinged and can
be lifted to clean oven bottom.
Drain fat, cool pan and grid slightly. (Do not let soiled pan and
grid stand in oven to cool.) Sprinkle with soap. Fill the pan with
warm water. Let pan and grid stand for a few minutes. Wash
or scour if necessary. Rinse and dry. The broiler pan and grid
may also be cleaned in the dishwasher.
The burner bowls can be removed for ease in cleaning. For
extra dried on soil, soak the bowls in warm soapy water.
The coil elements do not need to be cleaned. Any food spilled
on the element during cooking will burn off. Never immerse
coil elements in water.
Pull off knobs. Wash gently but do not soak. Dry and return
controls to oven, making sure to match flat area on the knob to
the flat area on shaft.
Allow top to cool before cleaning. Wash surface with a
dampened cloth and soapy water. For extra dried on soil,
scrub surface with smoothtop cleaner conditioner available
from an Amana Dealer. A single edge razor blade can be used
to scrape off dried on soil. Do not use a harsh cleanser or steel
wool pad. Metal markings should be cleaned after each use. If
metal markings are allowed to remain on the top they will
become increasingly difficult to remove.
Clean the inside of the door and the window area with warm
soapy water. Do not clean the oven door gasket. Gasket
should not be moved while cleaning. Avoid getting any
cleaning materials on gasket.
Wash all glass with cloth dampened in soapy water. Rinse and
polish with a dry cloth. If knobs are removed, do not allow
water to run down inside surface while cleaning.
Cool before cleaning. Frequent wiping with mild soap and
water prolongs time between self-cleanings. Be sure to rinse
thoroughly.
For heavy soil, clean by hand and rinse thoroughly. Remove
the drawer and racks for ease in cleaning. Be sure drawer is
dry before replacing.
22
Loading ...
Loading ...
Loading ...