Loading ...
Loading ...
Loading ...
10
TROUBLESHOOTING GUIDE
Problem Solution
If Blender fails to start:
Check if the Blender is securely plugged into a grounded
3 prong outlet.
If you have a circuit breaker box, make sure the circuit is
closed.
If Blender stops after 3 minutes:
It’s a part of the Blender operation to ensure lasting
durability. Turn the Control Dial to (O) and repeat the
process until desired consistency.
If Blender stops while blending:
When overloaded or jammed, it will automatically shut off
to prevent motor damage. Unplug the Blender. Remove
the Jar and use a spatula to rearrange ingredients.
Or, divide contents into smaller batches. For certain
recipes, adding liquid in the Jar may also reduce the load.
If ingredients are stuck or not
blending:
Unplug the Blender. Remove the Jar and use a spatula to
rearrange ingredients in the Jar.
If Blender stops while blending
with Personal Jar or Small Batch
Jar:
Unplug the Blender. Remove the Personal Jar or Small
Batch Jar with the Blade Assembly from the base. Shake it
a little bit. Place it back on the base, plug in the Blender
and turn it back on to continue regular use.
If Blender stops while blending
and the white LED ring flashes
rapidly:
An error is detected in the Blender. Contact an authorized
service center for assistance. Please see the “Warranty
and Service” sections.
If the white LED ring is off:
10 minutes of no activity will make the Blender go into
Sleep mode. To wake up the Blender, press ( ) button.
If the problem is not due to one of the above items, see the “Warranty and Service” section.
Do not return the Blender to the retailer. Retailers do not provide service.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
W11435383B.indb 10W11435383B.indb 10 07-08-2020 19:03:2107-08-2020 19:03:21
Loading ...
Loading ...
Loading ...